Microsoft Xbox: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
mNo edit summary
Line 28: Line 28:
*The read laser has failed
*The read laser has failed
====Solutions====
====Solutions====
*Replace the drive belt
*Replace the drive belt. A 15mm diameter belt is required, the belts from the Xbox & Xbox 360 are interchangeable.
*Replace the entire drive
*Replace the entire drive


Line 109: Line 109:
==Replacement Parts==
==Replacement Parts==
===Basic PCB Name===
===Basic PCB Name===
{| class="wikitable sortable"
|+Capacitors
! RefDes
! Qty
! Compatible Part Number
! Order Links
|-
|
|
|
|[https://www.digikey.com/ Digikey]
|}
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''



Revision as of 17:28, 11 February 2022

For more information, see this article's corresponding Wikipedia page: Xbox (console).
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
Microsoft Xbox
Preliminary Information
Release Year 2001
Leak Risk High
Batteries None
Mounting Technology Through Hole, SMD, BGA
Capacitor Types tbd
Destructive Entry No

This is a template page for creating new pages for devices, troubleshooting them, part lists, and other repair info.

Known Issues

Internal clock resets upon power loss

Causes

  • The aerogel supercapacitor responsible for keeping the RTC online has failed.

Solutions

  • Replace the capacitor.
  • Remove the capacitor, but manually set the time upon rebooting after power loss. (Version 1.6 boards require this capacitor and will fail to boot without it)
  • Connect your Xbox to the internet so that it can synchronize with a timeserver on boot. (Requires custom dashboard)

Disc drive no longer reads discs

Causes

  • The rubber drive belt has degraded
  • The read laser has failed

Solutions

  • Replace the drive belt. A 15mm diameter belt is required, the belts from the Xbox & Xbox 360 are interchangeable.
  • Replace the entire drive

System does not power on - no signs of life

Causes

  • The power supply unit has failed
  • The capacitors around the 20 pin connector have failed (v1.6)

Solutions

  • Replace power supply unit
  • Recap system board. On a 1.6 version unit, the 4 caps around the 20 pin connector are usually the culprit.

Disassembly Notes

See disassembly tab for step-by-step guide.

  • The four rubber feet on the underside of the device are held in with strong adhesive. If you want them to remain after disassembly, peel them back (from the outer edge of the device) just enough to expose the screw heads.
  • The internal IDE ribbon cable is over a decade old, so be very gentle with it. Bending it too many times will damage the internal connections, rendering it flaky or inoperable.
  • The power supply is fully exposed once the Xbox drive units are removed. Be very careful not to shock yourself on it.

Recommended Tools

Fastener Drivers
Fastener Types Sizes Notes
Torx T10 For main internal screws
Torx T20 For all external screws
Phillips PH2 For internal drive screws
Other Hand Tools
Tool Notes
Pry Tool To peel back the rubber feet on the underside of the device

Original Parts

Basic PCB Name

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Temp Type Brand Series
0 µF

Replacement Parts

Basic PCB Name

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

Related Links

References