- For more information, see this article's corresponding Wikipedia page: Device.
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
|
|
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
|
|
Known Issues
Symptom or Problem Encountered
Causes
Solutions
Disassembly Notes
- Unplug power and data cables
- Turn rotating part of base through 180 degrees and slide off
- Remove fixed part of base by removing two screws
- Remove four corner screws holding rear of case to front of monitor
- Gently slide the rear of the case backwards. May need spludger to initially loosen.
- Four screws to remove rear access panel
- Three screws, one on each side panel and one near flyback, to remove top chassis/shielding
- Undo screws holding joint switching regulator and interface board assembly and disconnect leads before sliding assembly upwards
Original Parts
There are a number of different boards found in the monitor
Purpose
|
Designation
|
Notes
|
Switching Reg
|
PWE-107 (JC-1401P3A, 120V)
PWE-142 (APC-H4311, 240V Australia?)
|
Different board, appears to depend on supply country voltage.
|
Interface
|
PWE-110
|
|
Deflection
|
PWE-105
|
|
Control
|
PWE-125A
|
|
LED
|
PWE-125B
|
|
Video
|
PWE-122
|
|
CRT
|
PWE-123
|
|
Tube
|
370HYB22-TC126 (PN2)
|
May differ, depending on...?
|
PWE-110 Interface
Capacitor Specifications and Footprint Information
RefDes
|
Qty
|
Capacitance
|
Voltage
|
Mount
|
Diameter/Size
|
Height
|
Lead Spacing
|
Temp
|
Type
|
Brand
|
Series
|
|
|
|
|
|
|
|
|
|
|
|
|
PWE-142 Switching Regulator
Replacement Parts
Basic PCB Name
Capacitors
RefDes
|
Qty
|
Compatible Part Number
|
Order Links
|
|
|
|
Digikey
|
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Related Links
References