ROBUS PROTON UNIVERSAL 360 PIR: Difference between revisions
Jump to navigation
Jump to search
m (Minor formatting) |
m (Add alternate name) |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 10: | Line 10: | ||
|Destructive Entry = No | |Destructive Entry = No | ||
|Input Voltage=220 - 240 VAC 50/60 Hz}} | |Input Voltage=220 - 240 VAC 50/60 Hz}} | ||
The ROBUS PROTON UNIVERSAL 360° PIR sensor (RU360-01) is a typical ceiling mountable PIR motion sensor intended for indoor lighting applications sold in the Australian and EU markets. | The ROBUS PROTON UNIVERSAL 360° PIR sensor (RU360-01) is a typical ceiling mountable PIR motion sensor intended for indoor lighting applications sold in the Australian and EU markets. | ||
Alternate re-brands (OEM unknown) | |||
* MATelec FMS-12080 | |||
==Known Issues== | ==Known Issues== | ||
===Device does not function or behaves erratically=== | ===Device does not function or behaves erratically=== | ||
====Causes==== | ====Causes==== | ||
*Film capacitor in the 'capacitive dropper' power supply has degraded and no longer passes enough current for the device to operate correctly | *Film capacitor in the 'capacitive dropper' power supply has degraded and no longer passes enough current for the device to operate correctly. | ||
<gallery> | |||
File:ROBUS-PROTON-360-1-mains-cap-damage-1.jpg|Damaged metalized film in JIMSON GMF X2 100 nF film capacitor | |||
</gallery> | |||
====Solutions==== | ====Solutions==== | ||
*Replace both X2 film capacitors (C29 & C30) | *Replace both X2 film capacitors (C29 & C30) | ||
==Disassembly Notes== | ==Disassembly Notes== | ||
{{warnAlt| | {{warnAlt|warning|med|This device contains a [[Mains Power#Non-Isolated Mains Power Supplies|non-isolated mains voltage]] 'capacitive dropper' style power supply. Low voltage circuity still poses a shock hazard.}} | ||
*Front bezel quarter turn to remove and expose controls | *Front bezel quarter turn to remove and expose controls | ||
*4 self tapping screws hold enclosure together, PH2 bit size | *4 self tapping screws hold enclosure together, PH2 bit size | ||
| Line 25: | Line 32: | ||
==Original Parts== | ==Original Parts== | ||
===Main PCB (only one)=== | ===Main PCB (only one)=== | ||
''No model numbers or board revisions visible'' | ''No model numbers or board revisions visible''<gallery> | ||
File:ROBUS-PROTON-360-1-orig-caps-1.jpg|Original JIMSON GMF series X2 mains film capacitors | |||
</gallery> | |||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information | |+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information | ||
| Line 40: | Line 49: | ||
!Brand | !Brand | ||
!Series | !Series | ||
!Failure Mode | |||
|- | |- | ||
|C29 | |C29 | ||
| Line 53: | Line 63: | ||
|JIMSON | |JIMSON | ||
|GMF | |GMF | ||
|Capacitance decrease, measured 0.383 µF | |||
|- | |- | ||
|C30 | |C30 | ||
| Line 66: | Line 77: | ||
|JIMSON | |JIMSON | ||
|GMF | |GMF | ||
|Capacitance decrease, measured 0.032 µF | |||
|} | |} | ||
==Replacement Parts== | ==Replacement Parts== | ||
| Line 83: | Line 95: | ||
|1 | |1 | ||
|BFC233920474 | |BFC233920474 | ||
|[https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/BFC233920474/2260488 | |[https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/BFC233920474/2260488 DigiKey] [https://www.mouser.com/ProductDetail/Vishay-BC-Components/BFC233920474?qs=ISnuAD7LFbJnCEL0%2FTPYjQ%3D%3D Mouser] | ||
|- | |- | ||
|C30 | |C30 | ||
|1 | |1 | ||
|BFC233910104 | |BFC233910104 | ||
|[https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/BFC233910104/5386843 | |[https://www.digikey.com/en/products/detail/vishay-beyschlag-draloric-bc-components/BFC233910104/5386843 DigiKey] [https://www.mouser.com/ProductDetail/Vishay-BC-Components/BFC233910104?qs=ISnuAD7LFbJOfbBoTZxmfw%3D%3D Mouser] | ||
|} | |} | ||
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search'' | ''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search'' | ||
{{WarnAlt|severity=note|size=small|message=Vishay recommends the F1772 series X2 'high stability grade' film capacitor for 'capacitive dropper' power supply applications. Use this if | {{WarnAlt|severity=note|size=small|message=Vishay recommends the F1772 series X2 'high stability grade' film capacitor for 'capacitive dropper' power supply applications. Use this if available in correct package for your device, otherwise Vishay 339 series or similar will suffice.}} | ||
==Related Links== | ==Related Links== | ||
*[https://www.youtube.com | *[https://www.youtube.com/watch?v=W4ifnLcAIDM ROBUS PIR Motion Sensor Repair & Failure Analysis - WizardTim (YouTube)] | ||
==References== | ==References== | ||
<references /> | <references /> | ||
[[Category:2010s]] | [[Category:2010s]] | ||
[[Category:Lighting]] | [[Category:Lighting]] | ||
Latest revision as of 09:55, 25 April 2023
ROBUS PROTON UNIVERSAL 360° PIR
| Preliminary Information | |
|---|---|
| Release Year | 2016 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole, SMD |
| Capacitor Types | Film (X2), Aluminum Electrolytic, Ceramic |
| Destructive Entry | No |
| Power Requirements | |
| Input Voltage | 220 - 240 VAC 50/60 Hz |
The ROBUS PROTON UNIVERSAL 360° PIR sensor (RU360-01) is a typical ceiling mountable PIR motion sensor intended for indoor lighting applications sold in the Australian and EU markets.
Alternate re-brands (OEM unknown)
- MATelec FMS-12080
Known Issues
Device does not function or behaves erratically
Causes
- Film capacitor in the 'capacitive dropper' power supply has degraded and no longer passes enough current for the device to operate correctly.
-
Damaged metalized film in JIMSON GMF X2 100 nF film capacitor
Solutions
- Replace both X2 film capacitors (C29 & C30)
Disassembly Notes
 WARNING This device contains a non-isolated mains voltage 'capacitive dropper' style power supply. Low voltage circuity still poses a shock hazard. |
- Front bezel quarter turn to remove and expose controls
- 4 self tapping screws hold enclosure together, PH2 bit size
- 3 plastic clips hold enclosure onto surface mounting plate
- Ensure potentiometers are correctly aligned with plastic knobs during re-assembly
Original Parts
Main PCB (only one)
No model numbers or board revisions visible
-
Original JIMSON GMF series X2 mains film capacitors
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series | Failure Mode |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C29 | 1 | 0.47 µF | 275 VAC | THT | 17.5 mm x 10.0 mm | 16.0 mm | 15.0 mm | Film X2 | JIMSON | GMF | Capacitance decrease, measured 0.383 µF | |
| C30 | 1 | 0.1 µF | 275 VAC | THT | 12.5 mm x 6.0 mm | 12.0 mm | 10.0 mm | Film X2 | JIMSON | GMF | Capacitance decrease, measured 0.032 µF |
Replacement Parts
The replacement Vishay 339 series film capacitors have higher ratings and should be expected to last far longer than the original capacitors.
-
Top (w/ new caps)
-
Bottom (w/ new caps)
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| C29 | 1 | BFC233920474 | DigiKey Mouser |
| C30 | 1 | BFC233910104 | DigiKey Mouser |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search
NOTE Vishay recommends the F1772 series X2 'high stability grade' film capacitor for 'capacitive dropper' power supply applications. Use this if available in correct package for your device, otherwise Vishay 339 series or similar will suffice.