ROBUS PROTON UNIVERSAL 360 PIR
ROBUS PROTON UNIVERSAL 360° PIR
| Preliminary Information | |
|---|---|
| Release Year | 2016 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole, SMD |
| Capacitor Types | Film (X2), Aluminum Electrolytic, Ceramic |
| Destructive Entry | No |
| Power Requirements | |
| Input Voltage | 220 - 240 VAC 50/60 Hz |
The ROBUS PROTON UNIVERSAL 360° PIR sensor (RU360-01) is a typical ceiling mountable PIR motion sensor intended for indoor applications sold in the Australian and EU markets.
Known Issues
Device does not function or behaves erratically
Causes
- Film capacitor in the 'capacitive dropper' power supply has degraded and no longer passes enough current for the device to operate correctly
Solutions
- Replace both X2 film capacitors (C29 & C30)
Disassembly Notes
 CAUTION This device contains a non-isolated mains voltage 'capacitive dropper' style power supply. Low voltages still pose a hazard. |
- Front bezel quarter turn to remove and expose controls
- 4 self tapping screws hold enclosure together, PH2 bit size
- 3 plastic clips hold enclosure onto surface mounting plate
- Ensure potentiometers are correctly aligned with plastic knobs during re-assembly
Original Parts
Main PCB (only one)
No model numbers or board revisions visible
-
Top
-
Bottom
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C29 | 1 | 0.47 µF | 275 VAC | THT | 17.5 mm x 10.0 mm | 16.0 mm | 15.0 mm | Film X2 | JIMSON | GMF | |
| C30 | 1 | 0.1 µF | 275 VAC | THT | 12.5 mm x 6.0 mm | 12.0 mm | 10.0 mm | Film X2 | JIMSON | GMF |
Replacement Parts
The replacement Vishay 339 series film capacitors have higher ratings and should be expected to last far longer than the original capacitors.
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| C29 | 1 | BFC233920474 | Digikey |
| C30 | 1 | BFC233910104 | Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search
NOTE Vishay recommends the F1772 series X2 'high stability grade' film capacitor for 'capacitive dropper' power supply applications. Use this if avalaible in correct package, otherwise Vishay 339 series will suffice.