SuperStride 740

From Caps Wiki
Revision as of 03:43, 10 February 2024 by Andrewsawesome (talk | contribs) (→‎Original Parts)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
For more information, see this article's corresponding Wikipedia page: Device.
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
SuperStride 740
Preliminary Information
Release Year Unknown
Leak Risk High
Batteries 2X Soldered 1.2V NiCd AA Cells
Mounting Technology Through Hole, SMD, Sockets
Capacitor Types Aluminum Electrolytic, Tantalum, Ceramic, Polymer
Destructive Entry No

The SuperStride 740 is a Mororola 68030 based system manufactured by Millenium Computer Corperation in Reno Nevada. This system was also manufactured as the Stride 740 and Shannon 5000.

Known Issues

Clock Battery Leakage

Causes

  • Aging/stoage conditions

Solutions

  • Desolder original batteries and thourougly clean leakage off of any components that may be affected.

Disassembly Notes

Access is gained via 4 screws that are located on the bottom corners of the case. Once the 4 screws are removed, the top cover is slid upwards to reveal the main board, SCSI HDD and serial I/0 daughter cards. The main board and main board tray must be removed to access the power supply, tape drive, and 5-1/4" floppy drive. WARNING: The main board and serial I/0 cards must be seperated from the main board tray before removal. Attempting to gain access to the components behind the main board without doing this could damage the RJ45 serial ports, as well as the large pin connectors for the I/0 cards themselves.

Original Parts

Basic PCB Name

Note model numbers and board revisions here

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
0 µF 0 °C

Replacement Parts

Basic PCB Name

Note: You should buy either the Ni-Cd batteries or the Ni-Mh batteries, not both

Capacitors
RefDes Qty Compatible Part Number Order Links
Ni-Cd (Nickel Cadmium) Batteries 2 N-700AACL Digikey
Ni-Mh (Nickel Metal Hydride) Batteries 2 HR-AAU / BK-200AAB9B Digikey Mouser
Battery Holder 1 2463 / 12BH325/C-GR Digikey Mouser

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

Related Links

References