HP 7475A Plotter

From Caps Wiki
Revision as of 20:55, 23 July 2023 by Akbkuku (talk | contribs)
Jump to navigation Jump to search
For more information, see this article's corresponding Wikipedia page: Device.
HP 7475A Plotter
Preliminary Information
Leak Risk Medium
Batteries None
Mounting Technology Through Hole
Capacitor Types Aluminum Electrolytic, Tantalum, Ceramic
Destructive Entry No

HP plotter with HP-IB (GP-IB) interface. Hold 6 pens in carousel.

Known Issues

Fish Smell

Causes

  • Leaking capacitor

Solutions

  • Clean PCB and replace cap

Disassembly Notes

Screws in rear from top removes plastic shell.

Two screws going through plot mechanism and PCB hold both in. HP-IB port screws must also be removed to remove PCB.

Original Parts

Main logic board

07475-60102

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
C1 1 68 µF 35V Through Hole 10mm 20mm 5mm -55-105 °C Aluminum Electrolytic Nippon Chemi-Con CERX
C2 1 2,200 µF 40V Through Hole (3 pin) 25mm 67mm 9.5mm Aluminum Electrolytic Sprague 674D
C24 1 6,800 µF 25V Through Hole (3 pin) 25mm 39mm 12mm 85°C Aluminum Electrolytic Nippon Chemi-Con SM
C20, C25 2 22 µF 25V Through Hole Axial 6mm 13mm 20mm 85°C Aluminum Electrolytic Nichicon H8333 ?
C31, C32 2 47 µF 50V Through Hole 8mm 12mm 3.5mm 85°C Aluminum Electrolytic Nichicon SE (M)

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
C2 1 MAL205857332E3 Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search

References