Digital Celebris GL ST: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
(Initial rough-out, will add caps soon)
 
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{WikipediaInfoAlt|Device}}
{{DeviceAlerts}}
{{DeviceAlerts}}
{{InfoboxDevice
{{InfoboxDevice
Line 10: Line 9:
|Batteries = None
|Batteries = None
|Destructive Entry = No
|Destructive Entry = No
|CPU=Pentium 133 MHz|Memory=128 MB|Memory Type=EDO|Display Interface=VGA}}
|CPU=Pentium 90 / 100 / 120 / 133 MHz|Memory=128 MB|Memory Type=EDO|Graphics=Matrox Millennium|Display Interface=VGA|Sound=ESS AudioDrive ES1688|Input Voltage=100-120 / 220-240 V AC|Current=5.5 / 3.0 A|Power Connector=IEC C14}}
 
==Known Issues ==
==Known Issues==
 
===Low or No Sound===
===Low or No Sound===
====Causes====
====Causes====
Line 19: Line 16:
====Solutions====
====Solutions====
*Replace capacitors
*Replace capacitors
 
=== BIOS Settings Not Saving===
===BIOS Settings Not Saving===
====Causes ====
====Causes====
*Dead clock battery
*Dead clock battery
====Solutions====
====Solutions====
*Replace DS12887 (see service manual, page 55)
*Replace DS12887 (see service manual, page 55)
==Disassembly Notes==
==Disassembly Notes==
See service manual pages 41-54 for disassembly instructions.
See service manual pages 41-54 for disassembly instructions.
==Original Parts==
==Original Parts==
===Motherboard===
===Motherboard ===
''Note model numbers and board revisions here''
{| class="wikitable sortable"
{| class="wikitable sortable"
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information
!RefDes
!RefDes
!Qty
!Qty
Line 47: Line 40:
!Series
!Series
|-
|-
|
|C2
|
|1
|0 µF
|100 µF
|
|16 V
|
|Through hole
|
|6.5 mm
|
|12.5 mm
|
|6 mm
|0 °C
|85 °C
|
|Electrolytic
|
|Teapo
|
|SK
|-
|C10, C11, C16
|3
|220 µF
|16 V
|Through hole
|8.3 mm
|12.5 mm
|6 mm
|85 °C
|Electrolytic
|Teapo
|SK
|-
|C20
|1
|470 µF
|16 V
|Through hole
|10.3 mm
|12.5 mm
|6 mm
| 85 °C
|Electrolytic
|Teapo
|SK
|-
|C22
|1
|47 µF
|25 V
|Through hole
|5.3 mm
|12.5 mm
|6 mm
|85 °C
|Electrolytic
|Teapo
|SK
|}
|}
==Replacement Parts==
==Replacement Parts==
===Motherboard===
===Motherboard===
Line 70: Line 101:
!Order Links
!Order Links
|-
|-
|
|C2
|
|1
|
|UKT1C101MDD / UKW1C101MDD
|[https://www.digikey.com/ Digikey]
|[https://www.digikey.com/en/products/detail/nichicon/UKT1C101MDD/1964334 Digikey] [https://www.mouser.com/ProductDetail/Nichicon/UKT1C101MDD?qs=kArNe9LFxXlBDIKR2xP2HQ%3D%3D Mouser] [https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_Nichicon-UKW1C101MDD_C250973.html LCSC]
|-
|C10, C11, C16
|3
|UKA1C221MED / RA3-25V221MG3#
|[https://www.digikey.com/en/products/detail/nichicon/UKA1C221MED/4992593 Digikey] [https://www.mouser.com/ProductDetail/Nichicon/UKA1C221MED?qs=TI%2F9gtmDCEH5KE61ua5uPg%3D%3D Mouser] [https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_ELNA-RA3-25V221MG3_C399581.html LCSC]
|-
|C20
|1
|UKA1C471MPD1TD / UKW1C471MPD1TD
|[https://www.digikey.com/en/products/detail/nichicon/UKA1C471MPD1TD/2787073 Digikey] [https://www.mouser.com/ProductDetail/Nichicon/UKW1C471MPD1TD?qs=WJSLByB5Mu2o1RNLMkZwVQ%3D%3D Mouser] [https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_Nichicon-UKW1C471MPD_C250974.html LCSC]
|-
|C22
|1
|UKA1E470MDD / UFG1E470MEM
|[https://www.digikey.com/en/products/detail/nichicon/UKA1E470MDD/4992605 Digikey] [https://www.mouser.com/ProductDetail/Nichicon/UKA1E470MDD?qs=TI%2F9gtmDCEHl6Eqphf1%252B7g%3D%3D Mouser] [https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_Nichicon-UFG1E470MEM_C2916044.html LCSC]
|}
|}
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
''I used higher-end audio-rated caps, because most were in the audio circuitry and the price difference wasn't that great. I'm sure cheaper caps could be substituted just fine. If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
 
===Kits===
===Kits===
*Digikey BOM: https://www.digikey.com/
*[https://www.digikey.com/short/n5rhqtwq Digikey BOM]
 
==Related Links==
==Related Links==
*[https://web.archive.org/web/20050115195735/http://h18000.www1.hp.com/LEGACYSUPPORT/Digital/pdf/sd_cegl.pdf Service Manual]
*[https://web.archive.org/web/20050115195735/http://h18000.www1.hp.com/LEGACYSUPPORT/Digital/pdf/sd_cegl.pdf Service Manual]
* [https://web.archive.org/web/20060106200917/http://h18000.www1.hp.com:80/legacysupport/digital/epid35.html Drivers]
*[https://stason.org/TULARC/pc/motherboards/D/DIGITAL-EQUIPMENT-CORPORATION-Pentium-CELEBRIS-GL.html Jumper Settings]
 
*[https://web.archive.org/web/20060106200917/http://h18000.www1.hp.com:80/legacysupport/digital/epid35.html Drivers]
==References==
==References==
<references />
<references />
[[Category:WorkNeeded:General]]
[[Category:WorkNeeded:General]]
[[Category:WorkNeeded:OriginalParts]]
[[Category:1990s]]
[[Category:WorkNeeded:ReplacementParts]]
[[Category:Motherboard]]

Latest revision as of 12:52, 12 March 2023

This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
Digital Celebris GL ST
Preliminary Information
Release Year 1995
Leak Risk Medium
Batteries None
Mounting Technology Through Hole
Capacitor Types Aluminum Electrolytic
Destructive Entry No
Hardware Specifications
CPU Pentium 90 / 100 / 120 / 133 MHz
Memory Capacity 128 MB
Memory Type EDO
Graphics Matrox Millennium
Display Interface VGA
Sound ESS AudioDrive ES1688
Power Requirements
Input Voltage 100-120 / 220-240 V AC
Current (Amps) 5.5 / 3.0 A
Power Connector IEC C14

Known Issues

Low or No Sound

Causes

  • Bad capacitors

Solutions

  • Replace capacitors

BIOS Settings Not Saving

Causes

  • Dead clock battery

Solutions

  • Replace DS12887 (see service manual, page 55)

Disassembly Notes

See service manual pages 41-54 for disassembly instructions.

Original Parts

Motherboard

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
C2 1 100 µF 16 V Through hole 6.5 mm 12.5 mm 6 mm 85 °C Electrolytic Teapo SK
C10, C11, C16 3 220 µF 16 V Through hole 8.3 mm 12.5 mm 6 mm 85 °C Electrolytic Teapo SK
C20 1 470 µF 16 V Through hole 10.3 mm 12.5 mm 6 mm 85 °C Electrolytic Teapo SK
C22 1 47 µF 25 V Through hole 5.3 mm 12.5 mm 6 mm 85 °C Electrolytic Teapo SK

Replacement Parts

Motherboard

Capacitors
RefDes Qty Compatible Part Number Order Links
C2 1 UKT1C101MDD / UKW1C101MDD Digikey Mouser LCSC
C10, C11, C16 3 UKA1C221MED / RA3-25V221MG3# Digikey Mouser LCSC
C20 1 UKA1C471MPD1TD / UKW1C471MPD1TD Digikey Mouser LCSC
C22 1 UKA1E470MDD / UFG1E470MEM Digikey Mouser LCSC

I used higher-end audio-rated caps, because most were in the audio circuitry and the price difference wasn't that great. I'm sure cheaper caps could be substituted just fine. If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

Related Links

References