Chauvet Strike 1: Difference between revisions
Millstream (talk | contribs) (Added new page. I need to figure out how to do anything more.) |
Millstream (talk | contribs) m (Added more) |
||
| Line 14: | Line 14: | ||
==Known Issues== | ==Known Issues== | ||
===Symptom or Problem Encountered=== | ===Symptom or Problem Encountered=== | ||
Non functioning light. No display on the control panel. | |||
I was told it's the PSU. It wasn't. | |||
====Causes==== | ====Causes==== | ||
* | *Shorted diode on controller board. | ||
====Solutions==== | ====Solutions==== | ||
*Replace a £0.60 diode. | *Replace a £0.60 diode. | ||
==Disassembly Notes== | ==Disassembly Notes== | ||
These are outdoor lights and the cap head screws may have corrosion in the aluminium housing. Use penetrating oil if possible. | These are outdoor lights and the cap head screws may have corrosion in the aluminium housing. Use penetrating oil if possible. | ||
Remove the three cap head screws holding the display and control panel housing. | |||
[[File:Controller board.jpg|thumb|Controller board showing faulty diode.]] | |||
== Diagnosis == | |||
Without power connected check for a short across D2, adjacent to the inductor and check again. | |||
If short lift on side of the diode and check again. In my case the shirt went away, as this diode was short. | |||
The voltage to the board is 63V. | |||
Replacing the diode fixed the fault. But As to what caused the failure in the first place? | |||
I repaired two of these with identical faults. | |||
==Original Parts== | ==Original Parts== | ||
===Basic PCB Name=== | ===Basic PCB Name=== | ||
| Line 39: | Line 55: | ||
!Series | !Series | ||
|- | |- | ||
| | |SS310 | ||
|1 | |1 | ||
|100 | |100 | ||
|3A | |3A | ||
| | |SMD | ||
| | | | ||
| | | | ||
| Line 66: | Line 82: | ||
|} | |} | ||
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ||
==References== | ==References== | ||
<references /> | <references /> | ||
Revision as of 21:21, 14 July 2023
- For more information, see this article's corresponding Wikipedia page: Device.
| Preliminary Information | |
|---|---|
| Release Year | 1980 |
| Leak Risk | Medium |
| Batteries | None |
| Mounting Technology | Through Hole, SMD, BGA, Sockets |
| Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic, Polymer |
| Destructive Entry | No |
This is a template page for creating new pages for devices, troubleshooting them, part lists, and other repair info.
Known Issues
Symptom or Problem Encountered
Non functioning light. No display on the control panel.
I was told it's the PSU. It wasn't.
Causes
- Shorted diode on controller board.
Solutions
- Replace a £0.60 diode.
Disassembly Notes
These are outdoor lights and the cap head screws may have corrosion in the aluminium housing. Use penetrating oil if possible. Remove the three cap head screws holding the display and control panel housing.
Diagnosis
Without power connected check for a short across D2, adjacent to the inductor and check again.
If short lift on side of the diode and check again. In my case the shirt went away, as this diode was short.
The voltage to the board is 63V.
Replacing the diode fixed the fault. But As to what caused the failure in the first place?
I repaired two of these with identical faults.
Original Parts
Basic PCB Name
Note model numbers and board revisions here
| RefDes | Qty | Voltage | Current | Mount | Diameter/Size | Height | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|
| SS310 | 1 | 100 | 3A | SMD | 0 °C |
Replacement Parts
Basic PCB Name
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| 1 |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.