Acer Aspire M1641: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
(Categories)
(Opening summary correction)
Line 10: Line 10:
|Destructive Entry = No
|Destructive Entry = No
}}
}}
Late 00s mATX PC available in multiple configurations, usually shipped with Vista or Windows 7, intended for home use.
Non-named motherboard from late 00s mATX PC available in multiple configurations, usually shipped with Vista or Windows 7, intended for home use. Motherboard appears with the same PCB in multiple other component configurations on other late-2000s Aspire M desktop PCs, however study may be non-transferrible.


Uses nVidia nForce 7050 chipset, known to reject some normally-valid configurations.
Uses nVidia nForce 7050 chipset, known to reject some normally-valid configurations.

Revision as of 01:23, 19 June 2023

This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
Acer M1641 Motherboard
Preliminary Information
Release Year 2009
Leak Risk High
Batteries CR232 Clock Backup
Mounting Technology Through Hole, SMD, Sockets
Capacitor Types Aluminum Electrolytic, Polymer
Destructive Entry No

Non-named motherboard from late 00s mATX PC available in multiple configurations, usually shipped with Vista or Windows 7, intended for home use. Motherboard appears with the same PCB in multiple other component configurations on other late-2000s Aspire M desktop PCs, however study may be non-transferrible.

Uses nVidia nForce 7050 chipset, known to reject some normally-valid configurations.

Known Issues

No boot after changing RAM

Causes

  • Total RAM added exceeds 4GB
  • RAM exceeds 2GB per DIMM
  • Total RAM exceeds 3GB (under certain bios configurations)
  • RAM rated speed is too high

Solutions

  • Reduce total RAM
  • Use matched DIMMs
  • Use a 1GB DIMM and a 2GB DIMM, please fill out info if you can identify which bios setting causes this
  • Try DDR2-800 RAM, the system may fail to boot if the RAM reports being too capable in some cases

OS Not Recognizing Working PCIe Expansion Device

Causes

  • The nForce 7050 chip's limited PCIe stability and compliance is affecting your new expansion device
  • Capacitor degradation is causing the device to be rejected

Solutions

  • Use a different expansion device
  • Recap

Disassembly Notes

CR232 clock battery is held in with a spring clip that may be live if the battery has charge.

Expansion cards are installed, from factory, using a metal bar which will usually be sharp.

Front drive cage is positioned in a way where it may be necessary to remove all internal drives before removing the motherboard, if there is any obstruction this is greatly recommended as the factory drive installation points will cause the drive to hit a leak-danger cap near the floppy port, or (on lower chance) three leak-danger caps next to the RAM slots.

Original Parts

Basic PCB Name

Note model numbers and board revisions here

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series Notes
EC30,EC71,EC41,EC45,EC57,EC54 6 1000 µF 6.3v Through-hole 8mm 16mm 4mm 0 °C Aluminum Electrolytic OST RLX High leak risk, low-ESR, navy and gold
0 µF 0 °C
0 µF 0 °C

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

Related Links

References