100 Minute Master Up/Down Timer: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
(add details)
(add table for pinout)
Line 174: Line 174:
|}
|}
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
== Connector Pinouts ==
{| class="wikitable"
|+ DE-9
|-
! Pin
! Function
|-
| 1
| Up
|-
| 2
| Stop
|-
| 3
| Reset
|-
| 4
| Down
|-
| 5
| Preset
|-
| 6
| Relay contact (dry contact, option "Z")
|-
| 7
| Relay contact (dry contact, option "Z")
|-
| 8
| N/C
|-
|9
| Ground
|}


== Related Links ==
== Related Links ==

Revision as of 21:45, 13 February 2022

100 Minute Master Up/Down Timer
Preliminary Information
Release Year 1994
Leak Risk Low
Batteries None
Mounting Technology Through Hole, Sockets
Capacitor Types Aluminum Electrolytic, Ceramic
Destructive Entry No

This is a standalone timer used in studios for synchronizing coundown/countup clocks. Manufactured by ESE. Model ES-362A. Uses Intel 8749-CT4 as the microcontroller.

Known Issues

The linear power supply runs hot and relies on electrolytic capacitors.

Symptom or Problem Encountered

  • No display
  • No timing signal

Causes

  • Dried out electrolytic capacitors and a blown linear regulator IC.

Solutions

  • Replace faulty parts.

Disassembly Notes

This device is easy to disassemble. The case is held together with screws and the PCB can be detached from the plastic standoffs easily. Make sure to snip the cable ties to make the wires long enough to flip over the board.

Original Parts

Main PCB

ES362A

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Lead Spacing Temp Type Brand Series
C1 1 4700 µF 10 Through Hole, Axial 12mm 85 °C Electrolytic Shoei CE
C2, C3 2 3300 µF 16 Through Hole, Radial 16mm 0.3" 105 °C Electrolytic Shoei CEW
C4 1 10 µF 35 Through Hole, Radial 5mm 0.1" 105 °C Electrolytic Shoei CEW
C5 1 100 µF 25 Through Hole, Radial 6mm 0.1" 105 °C Electrolytic Shoei CEW
C6, C7 2 10 pF 50 Through Hole, Radial 4mm 0.2" Ceramic Disc
C8, C10 3 0.01 µF 50 Through Hole, Radial 6mm 0.2" Ceramic Disc
C9 1 4.7 µF 50 Through Hole, Radial 4mm 0.1" 105 °C Electrolytic Shoei CEW
C11 1 0.1 µF 50 Through Hole, Radial 5mm 0.2" Ceramic Disc

Replacement Parts

Main PCB

Capacitors
RefDes Qty Compatible Part Number Order Links
C1 1 478TTA010M-ND Digikey
C2, C3 2 493-1797-ND Digikey
C4 1 493-11317-1-ND Digikey
C5 1 493-10975-1-ND - C9 1 493-13474-1-ND Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Connector Pinouts

DE-9
Pin Function
1 Up
2 Stop
3 Reset
4 Down
5 Preset
6 Relay contact (dry contact, option "Z")
7 Relay contact (dry contact, option "Z")
8 N/C
9 Ground

Related Links

References