Plantronics Colorplus
- For more information, see this article's corresponding Wikipedia page: Plantronics Colorplus.
New Device
| Preliminary Information | |
|---|---|
| Release Year | 1980 |
| Leak Risk | Medium |
| Batteries | None |
| Mounting Technology | Through Hole, SMD, BGA, Sockets |
| Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic, Polymer |
| Destructive Entry | No |
Known Issues
Symptom or Problem Encountered
Causes
- Description of cause
Solutions
- Solution to the problem
Disassembly Notes
Tools Needed
- 3/16 Hex Driver
Disassembly
- Start buy unscrewing the 4 standoffs from the two D-Sub connectors at the rear of the card. Then remove the ISA bracket.
- Using your fingers, separate the two boards by pulling them apart near each of the three plastic standoffs to release them.
- Pull the two boards apart, careful not to bend the connector pins.
Original Parts
Upper Board
Note model numbers and board revisions here
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 µF | 0 °C | ||||||||||
Lower Board
Note model numbers and board revisions here
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 µF | 0 °C |