Nokia Lumia 1020: Difference between revisions
Jump to navigation
Jump to search
m (→Replacement Parts: Fix heading names) |
|||
Line 34: | Line 34: | ||
== Disassembly Notes == | == Disassembly Notes == | ||
* There is a locking bar on the left side of the device, this is unlocked by undoing a torx screw behind the SIM card tray cover. | |||
* There is no adhesive holding the display down however there are some RF gaskets Nokia recommends replacing if you're repairing it properly (they can be easily reused). | |||
* FFC cables are fragile | |||
* Unplug battery cable before messing with PCBs | |||
* This device predates DRM and unique part UID locks found in modern phones, parts can be easily swapped without reprogramming. | |||
== Original Parts == | == Original Parts == |
Revision as of 17:23, 23 February 2022
- For more information, see this article's corresponding Wikipedia page: Nokia Lumia 1020.
Nokia Lumia 1020
Preliminary Information | |
---|---|
Release Year | 2013 |
Leak Risk | None |
Batteries | Yes, Li-Ion |
Mounting Technology | SMD, BGA, Flip Chip, High Density Interconnects |
Capacitor Types | Ceramic |
Destructive Entry | No |
The Nokia Lumia 1020 is a smartphone from 2013 running Windows Phone 8 (later 8.1). It notably had a camera with a 41 MP 58 mm² sensor considerably larger than other smartphones of the 2010s, it was regularly compared to compact and entry-level DSLR cameras.
Known Issues
Device does not charge after plugging into a bad USB charger
USB Vbus Protection IC Failed
- USB Vbus Fuse & TVS Protection IC (V3310) fails short circuit to protect Li-Ion charge management IC.
Solution 1: Bypass Protection IC
- Remove USB Vbus Fuse & TVS Protection IC (V3310)
- Bridge Vbus-in and Vbus-out pins.
- You will lose Vbus reversal and Vbus TVS protection!
-
Bypassed Protection IC
Solution 2: Replace Protection IC
- Replace USB Vbus Fuse & TVS Protection IC (V3310)
-
Replaced Protection IC
Disassembly Notes
- There is a locking bar on the left side of the device, this is unlocked by undoing a torx screw behind the SIM card tray cover.
- There is no adhesive holding the display down however there are some RF gaskets Nokia recommends replacing if you're repairing it properly (they can be easily reused).
- FFC cables are fragile
- Unplug battery cable before messing with PCBs
- This device predates DRM and unique part UID locks found in modern phones, parts can be easily swapped without reprogramming.
Original Parts
Mainboard
RM-875 APAC
Replacement Parts
Mainboard
RM-875 APAC
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
V3310 | 1 | LFTVS10-1F3 | Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.