Digital Celebris GL ST: Difference between revisions
Jump to navigation
Jump to search
(Added Digikey BOM) |
m (Minor infobox updates) |
||
| Line 9: | Line 9: | ||
|Batteries = None | |Batteries = None | ||
|Destructive Entry = No | |Destructive Entry = No | ||
|CPU=Pentium 90 / 100 / 120 / 133 MHz|Memory=128 MB|Memory Type=EDO|Graphics=Matrox | |CPU=Pentium 90 / 100 / 120 / 133 MHz|Memory=128 MB|Memory Type=EDO|Graphics=Matrox Millennium|Display Interface=VGA|Sound=ESS AudioDrive ES1688|Input Voltage=100-120 / 220-240 V AC|Current=5.5 / 3.0 A|Power Connector=IEC C14}} | ||
==Known Issues == | ==Known Issues == | ||
Revision as of 13:15, 10 April 2022
| This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so. | 
|
Digital Celebris GL ST
| Preliminary Information | |
|---|---|
| Release Year | 1995 |
| Leak Risk | Medium |
| Batteries | None |
| Mounting Technology | Through Hole |
| Capacitor Types | Aluminum Electrolytic |
| Destructive Entry | No |
| Hardware Specifications | |
| CPU | Pentium 90 / 100 / 120 / 133 MHz |
| Memory Capacity | 128 MB |
| Memory Type | EDO |
| Graphics | Matrox Millennium |
| Display Interface | VGA |
| Sound | ESS AudioDrive ES1688 |
| Power Requirements | |
| Input Voltage | 100-120 / 220-240 V AC |
| Current (Amps) | 5.5 / 3.0 A |
| Power Connector | IEC C14 |
Known Issues
Low or No Sound
Causes
- Bad capacitors
Solutions
- Replace capacitors
BIOS Settings Not Saving
Causes
- Dead clock battery
Solutions
- Replace DS12887 (see service manual, page 55)
Disassembly Notes
See service manual pages 41-54 for disassembly instructions.
Original Parts
Motherboard
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C2 | 1 | 100 µF | 16 V | Through hole | 6.5 mm | 12.5 mm | 6 mm | 85 °C | Electrolytic | Teapo | SK |
| C10, C11, C16 | 3 | 220 µF | 16 V | Through hole | 8.3 mm | 12.5 mm | 6 mm | 85 °C | Electrolytic | Teapo | SK |
| C20 | 1 | 470 µF | 16 V | Through hole | 10.3 mm | 12.5 mm | 6 mm | 85 °C | Electrolytic | Teapo | SK |
| C22 | 1 | 47 µF | 25 V | Through hole | 5.3 mm | 12.5 mm | 6 mm | 85 °C | Electrolytic | Teapo | SK |
Replacement Parts
Motherboard
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| C2 | 1 | UKT1C101MDD | Digikey |
| C10, C11, C16 | 3 | UKA1C221MED | Digikey |
| C20 | 1 | UKA1C471MPD1TD | Digikey |
| C22 | 1 | UKA1E470MDD | Digikey |
I used higher-end audio-rated caps, because most were in the audio circuitry and the price difference wasn't that great. I'm sure cheaper caps could be substituted just fine. If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.