IBM WDI-325Q 20MB Hard Drive: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
This is a circa 1987-1988 proprietary Hard Drive, manufactured by IBM Japan. Most often found in the IBM PS/2 Model 25 and 30.
"The PS/2 Model 25, 25-286, 30, and 30-286 used an 8-bit pseudo-IDE hard drive interface at 3:1 interleave. Both power and data I/O are provided to the drive through a single card-edge connector."<ref>[https://forum.vcfed.org/index.php?threads/hard-drive-for-ibm-ps-2-model-25.11416/#post-167559 vwestlife. “Hard Drive for Ibm Ps/2 Model 25?” ''Vintage Computer Federation Forums'', 10 June 2008, https://forum.vcfed.org/index.php?threads/hard-drive-for-ibm-ps-2-model-25.11416/.]</ref>{{WikipediaInfoAlt|Device}}
"The PS/2 Model 25, 25-286, 30, and 30-286 used an 8-bit pseudo-IDE hard drive interface at 3:1 interleave. Both power and data I/O are provided to the drive through a single card-edge connector."<ref>[https://forum.vcfed.org/index.php?threads/hard-drive-for-ibm-ps-2-model-25.11416/#post-167559 vwestlife. “Hard Drive for Ibm Ps/2 Model 25?” ''Vintage Computer Federation Forums'', 10 June 2008, https://forum.vcfed.org/index.php?threads/hard-drive-for-ibm-ps-2-model-25.11416/.]</ref>{{WikipediaInfoAlt|Device}}
{{DeviceAlerts}}
{{DeviceAlerts}}

Latest revision as of 05:11, 6 August 2024

This is a circa 1987-1988 proprietary Hard Drive, manufactured by IBM Japan. Most often found in the IBM PS/2 Model 25 and 30.

"The PS/2 Model 25, 25-286, 30, and 30-286 used an 8-bit pseudo-IDE hard drive interface at 3:1 interleave. Both power and data I/O are provided to the drive through a single card-edge connector."[1]

For more information, see this article's corresponding Wikipedia page: Device.
Preliminary Information
Leak Risk High
Batteries None
Destructive Entry No


Known Issues

Symptom or Problem Encountered

Causes

Solutions

Disassembly Notes

Four Phillips screws.

Original Parts

Controller Board – 6127880 – A07188

WDI-325Q Front
Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series Notes
C2, C9 2 47 µF 16 Through Hole 6mm 6mm 5mm 105 °C Electrolytic
C3, C4, C5, C6, C12 5 6.8 µF 16 Through Hole 4mm 6mm 5mm 105 °C Electrolytic C3 is unmarked
C7, C10, C11, C13 4 10 µF 16 Through Hole 4mm 6mm 5mm 105 °C Electrolytic
C8, C14 2 4.7 µF 16 Through Hole 4mm 6mm 5mm 105 °C Electrolytic
C1 1 100 µF 6.3 Through Hole 6mm 6mm 5mm 105 °C Electrolytic
WDI-325Q Back

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Related Links

References