Sharp LC-48CFG6002E: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
VisualWikitext
(Page creation)
 
 
(16 intermediate revisions by 2 users not shown)
Line 3: Line 3:
{{InfoboxDevice
{{InfoboxDevice
|Title = Sharp LC-48CFG6002E
|Title = Sharp LC-48CFG6002E
|Picture =  
|Picture =Sharp LC-48CFG6002E.jpg
|Release Year =  
|Release Year =2017
|Mounting Technology = Through Hole
|Mounting Technology = Through Hole, Surface Mount
|Capacitor Types = Aluminum Electrolytic
|Capacitor Types = Aluminum Electrolytic, Tantalum
|Leak Risk = Medium
|Leak Risk = Medium
|Batteries = None
|Batteries = No
|Destructive Entry = No
|Destructive Entry = No
}}
}}
This is a template page for creating new pages for devices, troubleshooting them, part lists, and other repair info.
48" LED TV assembled by Sharp. Power supply by Megmeet.
 
 
Model number explanation:<ref>https://en.tab-tv.com/identifyng-the-models-of-sharp-europe/</ref>
 
* '''LC –''' code assigned by the manufacturer to indicate that the product belongs to the class televisions.
* '''48 –''' screen size in inches
* '''С''' – type matrix screen on TV:  LED
* '''F''' – Full HD
* '''G''' – Year model development: 2nd half of 2016
* '''6''' – series
* '''00''' – model in the series
* '''2''' – type tuners in TV
* '''E''' – country for sale: Europe


== Known Issues ==
== Known Issues ==
Line 22: Line 35:


== Disassembly Notes ==
== Disassembly Notes ==
There are A LOT of screws to remove before you can lift the backpanel.  
There are 8 screws labeled ''P'' that hold down the bottom of the back panel. There are 16 screws labeled ''M'' that hold the top of the back panel. 4 of the ''M'' screws are flathead that go in the holes above the connectors. There are 9 screws with a different thread. 8 of them hold the feet and the last one holds the lid of the power plug.
 
The power supply board is held by four screws with washers. There are the four connectors CON1, CON2, CON4 and CON12 that need to be unplugged. 
 
To get to the backside of the power supply board, you need to get out two plastic clips on the board that hold a plastic protection sheet. This works with a small screwdriver or a spudger.
 
The logic board is fixed by adhesive tape. If it's needed to get it off there are four screws with washers. It's also held by two metals bars, that are held by three screws. You will also need to unplug the six connectors IR&KEY, SPEAKER, AMP POWER, MAIN POWER, INVERTER, LVDS and two wifi-antenna-connectors.  


== Original Parts ==
== Original Parts ==
=== MIP550D-DX2 ===
=== Megmeet MIP550D-DX2 ===
Power Supply Board
 
''REV 1.0''
''REV 1.0''


2012.12.27
2012.12.27
[[File:Megmeet MIP550D-DX2.jpg|thumb|'''Megmeet MIP550D-DX2'''|none]]
{| class="wikitable sortable"
{| class="wikitable sortable"
|+Capacitor [[Capacitor Specifications|Specifications]] and  [[Part Footprints|Footprint]] Information
|+Capacitor [[Capacitor Specifications|Specifications]] and  [[Part Footprints|Footprint]] Information
Line 44: Line 66:
!Series
!Series
|-
|-
|EC1
|EC1, EC3
|1
|2
|10 µF
|10 µF
|50
|50
Line 51: Line 73:
|5.25 mm
|5.25 mm
|11.5 mm
|11.5 mm
|6 mm
|5 mm
|0 °C
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC2
|1
|47 µF
|50
|Through Hole
|6.3 mm
|12 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC4, EC14
|2
|47 µF
|200
|Through Hole
|10 mm
|20 mm
|5 mm
| -25 °C–105 °C (T)
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#GF|GF]]
|-
|EC5
|1
|82 µF
|450
|Through Hole
|18.2 mm
|37 mm
|7 mm
|105 °C
|Aluminium Electrolytic
|Chang
|PW(M)
|-
|EC31
|1
|2,2 µF
|50
|Through Hole
|5.25 mm
|11 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC16
|1
|220 µF
|10
|Through Hole
|6.5 mm
|12 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC6
|1
|100 µF
|35
|Through Hole
|6.5 mm
|12 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC7
|1
|10 µF
|50
|Through Hole
|5 mm
|10 mm
|5 mm
|105 °C
|Aluminium Electrolytic
|CapXon
|LL
|-
|EC13
|1
|22 µF
|50
|Through Hole
|5 mm
|11 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#RL|RL]]
|-
|EC8, EC9, EC11
|3
|1000 µF
|10
|Through Hole
|10 mm
|17.5 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#GF|GF]]
|-
|EC10
|1
|220 µF
|10
|Through Hole
|6.5 mm
|12 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Chang
|[[Capacitor Series#GF|GF]]
|-
|EC12, EC15, EC17
|3
|470 µF
|25
|Through Hole
|10 mm
|17,5 mm
|5 mm
| -40 °C–105 °C
|Aluminium Electrolytic
|Aluminium Electrolytic
|Chang
|Chang
|RL
|[[Capacitor Series#GF|GF]]
|}
 
== LSC48OHNO8 ==
Logic Board
 
''T.MS6486.711''
 
7472B08DB708
 
B17072998-0A00947
[[File:Board2.jpg|none|thumb|'''LSC48OHNO8''']]
{| class="wikitable sortable"
|+Capacitor [[Capacitor Specifications|Specifications]] and  [[Part Footprints|Footprint]] Information
!RefDes
!Qty
!Capacitance
!Voltage
![https://caps.wiki/wiki/Part_Footprints Mount]
!Diameter/Size
!Height
!Temp
![https://caps.wiki/wiki/Capacitor_Types Type]
!Series
!Code
|-
|E1
|1
|470 µF
|35
|Through Hole
|10 mm
|12 mm
| –105 °C
|Aluminium Electrolytic
|RK
|
|-
|ED2
|1
|100 µF
|16
|Surface Mount
|6.5 mm
|5 mm
|
|
|
|H75
|-
|
|1
|220 µF
|16
|Surface Mount
|6.5 mm
|6 mm
|
|
|
|H74
|}
|}


==Replacement Parts==
== Replacement Parts ==
===Basic PCB Name===
 
=== Megmeet MIP550D-DX2 ===
{| class="wikitable sortable"
{| class="wikitable sortable"
|+Capacitors
|+Capacitors
Line 67: Line 293:
! Order Links
! Order Links
|-
|-
|EC1, EC3
|2
|EEU-EB1H100SB
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-EB1H100SB/2689377?s=N4IgTCBcDaIKJwKoFo4CECMAJDAGXAymiALoC%2BQA DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-EB1H100SB?qs=MtOUKumLmnYO%252Bb5nw8AIiA%3D%3D Mouser]
|-
|EC2
|1
|EEU-FR1H470B
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1H470B/9921043?s=N4IgTCBcDaIKJwKoFoBiAlAjACQCwHYAGAIRAF0BfIA DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1H470B?qs=tfZGHB2PWd1bObcqeQ%252B2mg%3D%3D Mouser]
|-
|EC4, EC14
|2
|
|
|
|-
|EC5
|1
|
|
|
|
|[https://www.digikey.com/ Digikey]
|-
|EC31
|1
|RES05112R2M050B
|[https://www.mouser.com/ProductDetail/KYOCERA-AVX/RES05112R2M050B?qs=1Kr7Jg1SGW8kgr2AGic3yA%3D%3D Mouser]
|-
|EC16
|1
|EEU-EB1A221SB
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-EB1A221S/949731 DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-EB1A221SB?qs=MtOUKumLmnZ7WXFPdor81A%3D%3D Mouser]
|-
|EC6
|1
|860240575006
|[https://www.digikey.com/en/products/detail/w%C3%BCrth-elektronik/860240575006/5727551?s=N4IgTCBcDaIBwDYAMYAsSCsB2DSkJAF0BfIA DigiKey] [https://www.mouser.com/ProductDetail/Wurth-Elektronik/860240575006?qs=0KOYDY2FL2%252BgvT1LIa61Jg%3D%3D Mouser]
|-
|EC7
|1
|
|
|-
|EC13
|1
|EEU-EB1H220SB
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-EB1H220SB/2689385?s=N4IgTCBcDaIKJwKoFo4CECMAJMYAMAymiALoC%2BQA DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-EB1H220SB?qs=MtOUKumLmnbvpTC%2FW3e3oQ%3D%3D Mouser]
|-
|EC8, EC9, EC11
|3
|EEU-FR1A102LB
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1A102LB/2504131?s=N4IgTCBcDaIKJwKoFoBiAlAjAQUwBjABkAhEAXQF8g DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1A102LB?qs=n1SRcuzDZT3oqY5NICig3w%3D%3D Mouser]
|-
|EC10
|1
|EEU-FR1A221B
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1A221B/2504118?s=N4IgTCBcDaIKJwKoFoBiAlAjAQTGTAQiALoC%2BQA DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1A221B?qs=n1SRcuzDZT2sQdwPytQGtA%3D%3D Mouser]
|-
|EC12, EC15, EC17
|3
|EEU-FR1E471B
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1E471B/2504090?s=N4IgTCBcDaIKJwKoFoBiAlAjHALAdkwCEQBdAXyA DigiKey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1E471B?qs=n1SRcuzDZT0sU0xqHz3J8g%3D%3D Mouser]
|}
|}
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
===Kits===
* Digikey BOM: https://www.digikey.com/
== Related Links ==
== Related Links ==


* [https://www.youtube.com Videos or other things that might be helpful to check out]
* [https://www.tvparts.co.uk/lcd-tv-spares/power-supply-lcd/sharp-3/mip550d-240v350-mip550-dx2-rev1-0-power-supply-for-sharp-lc-49cuf8462ks Power Supply Board]


== References ==
== References ==
<references />
<references />


[[Category:WorkNeeded:General]]
[[Category:Device]]
[[Category:WorkNeeded:OriginalParts]]
[[Category:2010s]]
[[Category:WorkNeeded:ReplacementParts]]
[[Category:LCD TV]]
[[Category:Other]]

Latest revision as of 20:55, 28 January 2024

For more information, see this article's corresponding Wikipedia page: Device.
Sharp LC-48CFG6002E
Preliminary Information
Release Year 2017
Leak Risk Medium
Batteries No
Mounting Technology Through Hole, Surface Mount
Capacitor Types Aluminum Electrolytic, Tantalum
Destructive Entry No

48" LED TV assembled by Sharp. Power supply by Megmeet.


Model number explanation:[1]

  • LC – code assigned by the manufacturer to indicate that the product belongs to the class televisions.
  • 48 – screen size in inches
  • С – type matrix screen on TV:  LED
  • F – Full HD
  • G – Year model development: 2nd half of 2016
  • 6 – series
  • 00 – model in the series
  • 2 – type tuners in TV
  • E – country for sale: Europe

Known Issues

Symptom or Problem Encountered

Causes

  • Powers off shortly after turning on

Solutions

  • Replace Caps

Disassembly Notes

There are 8 screws labeled P that hold down the bottom of the back panel. There are 16 screws labeled M that hold the top of the back panel. 4 of the M screws are flathead that go in the holes above the connectors. There are 9 screws with a different thread. 8 of them hold the feet and the last one holds the lid of the power plug.

The power supply board is held by four screws with washers. There are the four connectors CON1, CON2, CON4 and CON12 that need to be unplugged.

To get to the backside of the power supply board, you need to get out two plastic clips on the board that hold a plastic protection sheet. This works with a small screwdriver or a spudger.

The logic board is fixed by adhesive tape. If it's needed to get it off there are four screws with washers. It's also held by two metals bars, that are held by three screws. You will also need to unplug the six connectors IR&KEY, SPEAKER, AMP POWER, MAIN POWER, INVERTER, LVDS and two wifi-antenna-connectors.

Original Parts

Megmeet MIP550D-DX2

Power Supply Board

REV 1.0

2012.12.27

Megmeet MIP550D-DX2
Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
EC1, EC3 2 10 µF 50 Through Hole 5.25 mm 11.5 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC2 1 47 µF 50 Through Hole 6.3 mm 12 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC4, EC14 2 47 µF 200 Through Hole 10 mm 20 mm 5 mm -25 °C–105 °C (T) Aluminium Electrolytic Chang GF
EC5 1 82 µF 450 Through Hole 18.2 mm 37 mm 7 mm 105 °C Aluminium Electrolytic Chang PW(M)
EC31 1 2,2 µF 50 Through Hole 5.25 mm 11 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC16 1 220 µF 10 Through Hole 6.5 mm 12 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC6 1 100 µF 35 Through Hole 6.5 mm 12 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC7 1 10 µF 50 Through Hole 5 mm 10 mm 5 mm 105 °C Aluminium Electrolytic CapXon LL
EC13 1 22 µF 50 Through Hole 5 mm 11 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang RL
EC8, EC9, EC11 3 1000 µF 10 Through Hole 10 mm 17.5 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang GF
EC10 1 220 µF 10 Through Hole 6.5 mm 12 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang GF
EC12, EC15, EC17 3 470 µF 25 Through Hole 10 mm 17,5 mm 5 mm -40 °C–105 °C Aluminium Electrolytic Chang GF

LSC48OHNO8

Logic Board

T.MS6486.711

7472B08DB708

B17072998-0A00947

LSC48OHNO8
Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Temp Type Series Code
E1 1 470 µF 35 Through Hole 10 mm 12 mm –105 °C Aluminium Electrolytic RK
ED2 1 100 µF 16 Surface Mount 6.5 mm 5 mm H75
1 220 µF 16 Surface Mount 6.5 mm 6 mm H74

Replacement Parts

Megmeet MIP550D-DX2

Capacitors
RefDes Qty Compatible Part Number Order Links
EC1, EC3 2 EEU-EB1H100SB DigiKey Mouser
EC2 1 EEU-FR1H470B DigiKey Mouser
EC4, EC14 2
EC5 1
EC31 1 RES05112R2M050B Mouser
EC16 1 EEU-EB1A221SB DigiKey Mouser
EC6 1 860240575006 DigiKey Mouser
EC7 1
EC13 1 EEU-EB1H220SB DigiKey Mouser
EC8, EC9, EC11 3 EEU-FR1A102LB DigiKey Mouser
EC10 1 EEU-FR1A221B DigiKey Mouser
EC12, EC15, EC17 3 EEU-FR1E471B DigiKey Mouser

Related Links

References

  1. ↑ https://en.tab-tv.com/identifyng-the-models-of-sharp-europe/
Retrieved from "https://caps.wiki/index.php?title=Sharp_LC-48CFG6002E&oldid=4597"