Iwill KA266-R Ver 1.3: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
VisualWikitext
(All info has been added for replacement caps. Clearances were checked and the height differences for the new caps will have no impact.)
m (Reverted edits by WizardTim (talk) to last revision by Andrewsawesome)
Tag: Rollback
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{InfoboxDevice
{{InfoboxDevice
|Title = Iwill KA266-R Ver. 1.3
|Title = Iwill KA266-R Ver. 1.3
|Picture =Iwill KA266R Ver13.jpeg
|Picture =Iwill_KA266R_Ver_13.jpg
|Release Year = 2001
|Release Year = 2001
|Mounting Technology = Through Hole, SMD, BGA, Sockets
|Mounting Technology = Through Hole, SMD, BGA, Sockets
|Capacitor Types = Wet Electrolytic, Tantalum, MLCC
|Capacitor Types = Wet Electrolytic, Polymer, Tantalum, MLCC
|Leak Risk = Medium
|Leak Risk = Medium
|Batteries = CR2032 Coin RTC
|Batteries = CR2032 Coin RTC
|Destructive Entry = No
|Destructive Entry = No
}}
}}
This page is for the Iwill KA266-R AMD motherboard version 1.3. This Board was made in 2001 and has hardware IDE raid with 3 DDR 266/200 slots, 4 IDE channels, 5 PCI slots, 4.1 channel integrated sound (C3DX HSP56), and an AGP slot.
The Iwill KA266-R is a PC motherboard from 2001 for AMD socket A CPUs and has hardware IDE RAID with 3 DDR 266/200 slots, 4 IDE channels, 5 PCI slots, 4.1 channel integrated sound (C3DX HSP56), and an AGP slot.
==Known Issues==
==Known Issues==
===Problems Encountered===
===Bulging capacitors around PCI slots===
Aluminum electrolytics around the PCI slots are starting to bulge from age and all electrolytics on this board are the same brand and will probably do the same.
Aluminum electrolytics around the PCI slots are starting to bulge from age and all electrolytics on this board are the same brand and will probably do the same.
====Causes====
====Causes====
Line 24: Line 24:
* This PCB is a high density multi-layer PCB with a high thermal mass, some soldering irons may struggle
* This PCB is a high density multi-layer PCB with a high thermal mass, some soldering irons may struggle
==Original Parts==
==Original Parts==
===Iwill KA266-R Ver 1.3===
===Iwill KA266-R Motherboard===
''Ver 1.3''
{| class="wikitable sortable"
{| class="wikitable sortable"
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information
Line 42: Line 43:
|TC5,9,10,11,12,13,14,15,16,17,20,21,38
|TC5,9,10,11,12,13,14,15,16,17,20,21,38
|13
|13
|1500µF
|1500 µF
|6.3v
|6.3 V
|Through Hole
|Through Hole
|10mm
|10 mm
|15mm
|15 mm
|5mm
|5 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
Line 55: Line 56:
|TC23,24,25,#?
|TC23,24,25,#?
|4
|4
|1500µF
|1500 µF
|10v
|10 V
|Through Hole
|Through Hole
|10mm
|10 mm
|20.3mm
|20.3 mm
|5mm
|5 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
Line 68: Line 69:
|TC6,7,29,31,37,41,43,44,47,48,49
|TC6,7,29,31,37,41,43,44,47,48,49
|11
|11
|1000µF
|1000 µF
|6.3v
|6.3 V
|Through Hole
|Through Hole
|8mm
|8 mm
|11.8mm
|11.8 mm
|3.5mm
|3.5 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
Line 81: Line 82:
|TC32,35,36
|TC32,35,36
|3
|3
|470µF
|470 µF
|16v
|16 V
|Through Hole
|Through Hole
|8mm
|8 mm
|14mm
|14 mm
|3.5mm
|3.5 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
Line 94: Line 95:
|TC4,18,19,54
|TC4,18,19,54
|4
|4
|220µF
|220 µF
|16v
|16 V
|Through Hole
|Through Hole
|6.5mm
|6.5 mm
|12mm
|12 mm
|2.5mm
|2.5 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
Line 107: Line 108:
|TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#?
|TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#?
|18
|18
|22µF
|22 µF
|16v
|16 V
|Through Hole
|Through Hole
|5mm
|5 mm
|5.5mm
|5.5 mm
|2mm
|2 mm
|105°C
|105 °C
|Wet Electrolytic
|Wet Electrolytic
|HERMEI
|HERMEI
|SH
|SH
|-
|TC8
|1
|820 µF
|4 V
|Through Hole
|10 mm
|12.5 mm
|5 mm
|105 °C
|Polymer
|Fujitsu
|(null)
|}
|}
==Replacement Parts==
==Replacement Parts==
===Basic PCB Name===
===Iwill KA266-R Motherboard===
''Ver 1.3''
{| class="wikitable sortable"
{| class="wikitable sortable"
|+Capacitors
|+Capacitors
Line 130: Line 145:
|13
|13
|EEU-FS0J152B
|EEU-FS0J152B
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FS0J152B/7381147 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FS0J152B/7381147 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FS0J152B?qs=pfd5qewlna54jjsM1Mr%252Bbw%3D%3D Mouser]
|-
|-
|TC23,24,25,#?
|TC23,24,25,#?
|4
|4
|EEU-FR1A152B
|EEU-FR1A152B
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1A152B/2504094 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1A152B/2504094 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1A152B?qs=n1SRcuzDZT1B1Uhv6eyTXQ%3D%3D Mouser]
|-
|-
|TC6,7,29,31,37,41,43,44,47,48,49
|TC6,7,29,31,37,41,43,44,47,48,49
|11
|11
|ECA-0JHG102
|ECA-0JHG102
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/ECA-0JHG102/245108 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/ECA-0JHG102/245108 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/ECA-0JHG102?qs=JhVVFH6aryYjjtGeZx5nwQ%3D%3D Mouser]
|-
|-
|TC32,35,36
|TC32,35,36
|3
|3
|EEU-FR1C471
|EEU-FR1C471
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1C471/2433528 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEU-FR1C471/2433528 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/EEU-FR1C471?qs=Uw8ySfEHS7KxXdGBPGtJqw%3D%3D Mouser]
|-
|-
|TC4,18,19,54
|TC4,18,19,54
|4
|4
|ECA-1CHG221
|ECA-1CHG221
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/ECA-1CHG221/245129 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/ECA-1CHG221/245129 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/ECA-1CHG221I?qs=rMMd5vBiahqXC%252BWbeCtwVA%3D%3D Mouser]
|-
|-
|TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#?
|TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#?
|18
|18
|EEA-GA1C220
|EEA-GA1C220
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEA-GA1C220/2504573 Digikey]
|[https://www.digikey.com/en/products/detail/panasonic-electronic-components/EEA-GA1C220/2504573 Digikey] [https://www.mouser.com/ProductDetail/Panasonic/EEA-GA1C220?qs=GOLS%2Fsd%2F%2FK3pMWYSO9aNmw%3D%3D Mouser]
|-
|TC8
|1
|RR50G821MDN1 / RL80G821MDN1
|[https://www.digikey.com/en/products/detail/nichicon/RR50G821MDN1/2207228 Digikey] [https://www.mouser.com/ProductDetail/Nichicon/RL80G821MDN1?qs=sGAEpiMZZMs9%2FSpGH%2Fyc7L%252BxbB%2Fs9b2KlzL5swIXuGU%3D Mouser]
|}
|}
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.''
===Kits===
===Kits===
*Digikey BOM: [https://www.digikey.com/en/mylists/list/VCRKSVWW19 Digikey]
*Digikey BOM: [https://www.digikey.com/en/mylists/list/VCRKSVWW19 Digikey]

Latest revision as of 08:54, 9 June 2023

Iwill KA266-R Ver. 1.3
Preliminary Information
Release Year 2001
Leak Risk Medium
Batteries CR2032 Coin RTC
Mounting Technology Through Hole, SMD, BGA, Sockets
Capacitor Types Wet Electrolytic, Polymer, Tantalum, MLCC
Destructive Entry No

The Iwill KA266-R is a PC motherboard from 2001 for AMD socket A CPUs and has hardware IDE RAID with 3 DDR 266/200 slots, 4 IDE channels, 5 PCI slots, 4.1 channel integrated sound (C3DX HSP56), and an AGP slot.

Known Issues

Bulging capacitors around PCI slots

Aluminum electrolytics around the PCI slots are starting to bulge from age and all electrolytics on this board are the same brand and will probably do the same.

Causes

  • Age
  • Cap Chemistry
  • Heat around PCI card area & CPU

Solutions

  • Replace all electrolytic caps

Disassembly Notes

  • Handle PCB by edges to avoid stressing BGA devices or touching static sensitive devices
  • Use ESD safe equipment
  • This PCB is a high density multi-layer PCB with a high thermal mass, some soldering irons may struggle

Original Parts

Iwill KA266-R Motherboard

Ver 1.3

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
TC5,9,10,11,12,13,14,15,16,17,20,21,38 13 1500 µF 6.3 V Through Hole 10 mm 15 mm 5 mm 105 °C Wet Electrolytic HERMEI LE
TC23,24,25,#? 4 1500 µF 10 V Through Hole 10 mm 20.3 mm 5 mm 105 °C Wet Electrolytic HERMEI LE
TC6,7,29,31,37,41,43,44,47,48,49 11 1000 µF 6.3 V Through Hole 8 mm 11.8 mm 3.5 mm 105 °C Wet Electrolytic HERMEI LE
TC32,35,36 3 470 µF 16 V Through Hole 8 mm 14 mm 3.5 mm 105 °C Wet Electrolytic HERMEI LE
TC4,18,19,54 4 220 µF 16 V Through Hole 6.5 mm 12 mm 2.5 mm 105 °C Wet Electrolytic HERMEI HT
TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#? 18 22 µF 16 V Through Hole 5 mm 5.5 mm 2 mm 105 °C Wet Electrolytic HERMEI SH
TC8 1 820 µF 4 V Through Hole 10 mm 12.5 mm 5 mm 105 °C Polymer Fujitsu (null)

Replacement Parts

Iwill KA266-R Motherboard

Ver 1.3

Capacitors
RefDes Qty Compatible Part Number Order Links
TC5,9,10,11,12,13,14,15,16,17,20,21,38 13 EEU-FS0J152B Digikey Mouser
TC23,24,25,#? 4 EEU-FR1A152B Digikey Mouser
TC6,7,29,31,37,41,43,44,47,48,49 11 ECA-0JHG102 Digikey Mouser
TC32,35,36 3 EEU-FR1C471 Digikey Mouser
TC4,18,19,54 4 ECA-1CHG221 Digikey Mouser
TC1,2,3,22,27,28,33,34,39,40,42,45,46,50,51,52,53,#? 18 EEA-GA1C220 Digikey Mouser
TC8 1 RR50G821MDN1 / RL80G821MDN1 Digikey Mouser

Kits

Related Links

References

Retrieved from "https://caps.wiki/index.php?title=Iwill_KA266-R_Ver_1.3&oldid=3801"