Roland MC-505: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
| Line 4: | Line 4: | ||
|Release Year = 1998 | |Release Year = 1998 | ||
|Leak Risk = Low | |Leak Risk = Low | ||
|Destructive Entry = | |Mounting Technology=Through Hole, SMD|Capacitor Types=Aluminum Electrolytic, Tantalum, Ceramic|Batteries=None|Destructive Entry = Glued faceplate, replacement adhesive needed | ||
}} | |Storage=SmartMedia Card|Power Connector=IEC C13/C14 Socket}} | ||
From Roland's Groovebox line of products(Related: [[Roland MC-303]]), the MC-505 is a music sequencer with integrated ROMpler for sound creation. | From Roland's Groovebox line of products(Related: [[Roland MC-303]]), the MC-505 is a music sequencer with integrated ROMpler for sound creation. | ||
| Line 18: | Line 18: | ||
*Replace potentiometer, hopefully find knob | *Replace potentiometer, hopefully find knob | ||
=== Buttons | === Buttons Stuck Inside === | ||
[[File:Roland MC505 BottonsMissing.jpg|none|thumb]] | [[File:Roland MC505 BottonsMissing.jpg|none|thumb]] | ||
====Causes==== | ====Causes==== | ||
* | *Rushed reassembly | ||
*Depressed in too far | |||
====Solutions==== | ====Solutions==== | ||
* | *Open device, remove button panel, re-apply double sided tape to secure buttons and replace them, reassemble | ||
== Disassembly Notes == | == Disassembly Notes == | ||
Be sure to remove knobs, slider caps, rotary wheel, and nut under rotary wheel when removing faceplate | Be sure to remove knobs, slider caps, rotary wheel, and nut under rotary wheel when removing top panel | ||
Clear faceplate over LCD is double sided taped on top and bottom. Use a thin guitar pick to break glue loose from inside and then work it slowly from the front once raised. '''Warning:''' the tinted covers over 7 segment displays can be scratched | |||
== Original Parts == | == Original Parts == | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|+Potentiometers | |+Potentiometers | ||
! Type | ! Type | ||
! Qty | ! Qty | ||
! Part Number | ! Roland Part Name | ||
!OEM Part Number | |||
|- | |- | ||
|Volume | |Volume | ||
|2 | |2 | ||
|RK09L12D0 10KBX2 | |RK09L12D0 10KBX2 | ||
|RK09L12D0-F15-C0-A10 | |||
|- | |- | ||
|Non-Detented, single channel | |Non-Detented, single channel | ||
|8 | |8 | ||
|RK09L1140 10KB | |RK09L1140 10KB | ||
|RK09L1140A5L-F15-C0-B10 | |||
|- | |- | ||
|Detented, single channel | |Detented, single channel | ||
|2 | |2 | ||
|RK09L1140 10KB with click | |RK09L1140 10KB with click | ||
|RK09L1140A5L-F15-C1-B10 | |||
|} | |} | ||
''Original potentiometer's datasheet:'' https://tech.alpsalpine.com/assets/products/catalog/rk09l.en.pdf | |||
==Replacement Parts== | ==Replacement Parts== | ||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|+Potentiometers | |+Potentiometers | ||
| Line 58: | Line 64: | ||
! Compatible Part Number | ! Compatible Part Number | ||
! Order Links | ! Order Links | ||
|- | |||
|Volume | |||
|2 | |||
|P0925N-FC15AR10K | |||
|[https://www.mouser.com/ProductDetail/BI-Technologies-TT-Electronics/P0925N-FC15AR10K?qs=mJjUQczmFni3omuu06xzaQ%3D%3D Mouser] | |||
|- | |- | ||
|Non-Detented, single channel | |Non-Detented, single channel | ||
|8 | |||
|P0915N-FC15BR10K | |||
|[https://www.mouser.com/ProductDetail/BI-Technologies-TT-Electronics/P0915N-FC15AR10K?qs=mJjUQczmFnieBkKWeOAMww%3D%3D Mouser], [https://www.digikey.com/en/products/detail/tt-electronics-bi/P0915N-FC15BR10K/4780740?s=N4IgTCBcDaIAoAYCcBGArAOQLQDEDC6AQgEooIDSIAugL5A Digikey] | |||
|- | |||
|Detented, single channel | |||
|2 | |||
|P0915N-1FC15BR10K | |||
| | | | ||
|} | |} | ||
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ||
'''Note:''' It seems detented potentiometers are not being made or are extremely difficult to find. The provided part number is from the P09x datasheet[https://www.ttelectronics.com/TTElectronics/media/ProductFiles/Datasheet/P09x.pdf] that should be detented but there are no good sources available. A non-detented model could be substituted without issue. | |||
== External Links == | == External Links == | ||
| Line 72: | Line 90: | ||
== References == | == References == | ||
<references /> | <references /> | ||
[[Category: | [[Category:Music Sequencer]] | ||
[[Category:1990s]] | |||
Revision as of 15:32, 17 August 2023
- For more information, see this article's corresponding Wikipedia page: Device.
Roland MC-505
| Preliminary Information | |
|---|---|
| Release Year | 1998 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole, SMD |
| Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic |
| Destructive Entry | Glued faceplate, replacement adhesive needed |
| Hardware Specifications | |
| Storage | SmartMedia Card |
| Power Requirements | |
| Power Connector | IEC C13/C14 Socket |
From Roland's Groovebox line of products(Related: Roland MC-303), the MC-505 is a music sequencer with integrated ROMpler for sound creation.
Known Issues
Knob is Gone
Causes
- A big whack
Solutions
- Replace potentiometer, hopefully find knob
Buttons Stuck Inside
Causes
- Rushed reassembly
- Depressed in too far
Solutions
- Open device, remove button panel, re-apply double sided tape to secure buttons and replace them, reassemble
Disassembly Notes
Be sure to remove knobs, slider caps, rotary wheel, and nut under rotary wheel when removing top panel
Clear faceplate over LCD is double sided taped on top and bottom. Use a thin guitar pick to break glue loose from inside and then work it slowly from the front once raised. Warning: the tinted covers over 7 segment displays can be scratched
Original Parts
| Type | Qty | Roland Part Name | OEM Part Number |
|---|---|---|---|
| Volume | 2 | RK09L12D0 10KBX2 | RK09L12D0-F15-C0-A10 |
| Non-Detented, single channel | 8 | RK09L1140 10KB | RK09L1140A5L-F15-C0-B10 |
| Detented, single channel | 2 | RK09L1140 10KB with click | RK09L1140A5L-F15-C1-B10 |
Original potentiometer's datasheet: https://tech.alpsalpine.com/assets/products/catalog/rk09l.en.pdf
Replacement Parts
| Type | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Volume | 2 | P0925N-FC15AR10K | Mouser |
| Non-Detented, single channel | 8 | P0915N-FC15BR10K | Mouser, Digikey |
| Detented, single channel | 2 | P0915N-1FC15BR10K |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Note: It seems detented potentiometers are not being made or are extremely difficult to find. The provided part number is from the P09x datasheet[1] that should be detented but there are no good sources available. A non-detented model could be substituted without issue.
External Links
- Service Manual: https://ia600306.us.archive.org/1/items/RolandMc-505GrooveboxServiceNotes/MC-505_groovebox_SM.pdf