Cooler Master Masterkeys Pro L

From Caps Wiki
Revision as of 19:53, 17 January 2023 by OADINC (talk | contribs) (Added lots of missing information. Still needs al the capacitor/replacement part links.)
Jump to navigation Jump to search
For more information, see this article's corresponding Wikipedia page: Device.
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
Masterkeys Pro L
Preliminary Information
Release Year 2016
Leak Risk None
Batteries None
Mounting Technology Through Hole, SMD
Capacitor Types Ceramic?
Destructive Entry No
Hardware Specifications
CPU 32bit ARM Cortex M3
Memory Capacity 512KB
Power Requirements
Input Voltage 5V
Power Connector USB - B Micro

This guide is compatible with the RGB/White version and probably, though untested/unconfirmed, with the Masterkeys Pro S/M variants.

Disassembly Notes

To dissemble the keyboard, flip over the keyboard and pop off the top right rubber feet. Bellow it is the only screw that holds the enclosure together. Afterwards use a spudger or the back of a knife to carefully pop al the tabs, they are spaced approximately 8 cm apart around the entire edge. Be careful when opened because of a cable which is attached at the back of the PCB to the bottom casing. This cable can be unplugged/unscrewed.

When removing a key switch use a soldering iron to heat up the bottom 2 contacts of the desired switch, then carefully pull from the front whilst pressing in two little clips on the top and bottom side of the switch. A solder sucker or solder wick is recommended though definitely not necessary.

To solder it back, hold the key switch in the socket and solder the pins back on.

Variants

These variants of the keyboards exists

Keyboard variants
Switch Type Lighting Type Skew
Cherry MX RGB Blue RGB SGK-6020-KKCL1-US
Cherry MX RGB Blue White SGK-4070-KKCL1-US
Cherry MX RGB Brown RGB SGK-6020-KKCM1-US
Cherry MX RGB Brown White SGK-4070-KKCM1-US
Cherry MX RGB Red RGB SGK-6020-KKCR1-US
Cherry MX RGB Red White SGK-4070-KKCR1-US

Replacement Parts

Switches
Qty Switch Type Link
105 Cherry MX Blue White TBD
105 Cherry MX Blue RGB "
105 Cherry MX Brown White "
105 Cherry MX Brown RGB "
105 Cherry MX Red White "
105 Cherry MX Red RGB "

Related Links

References