Disassembly:Atari SC1224

Neck Board Removal

The neck board on the SC1224 has many cables and connectors on it and is glued to the tube with a patch of silicone.

Disconnection Checklist:

• Detach two ground wires going to screws on the power supply
• Disconnect black (degauss?) cable on the bottom of the neck board
• Cut silicone around socket
• Cut sleeved cable ties holding it to the neck board to give room to move it

• These are soldered in place connectors that cannot be unplugged

• Pay attention to red cable (CRT heater?) as it is permanently connected to the tube socket and flyback transformer