Disassembly:Atari SC1224
Jump to navigation
Jump to search
Neck Board Removal
The neck board on the SC1224 has many cables and connectors on it and is glued to the tube with a patch of silicone.
Disconnection Checklist:
- Detach two ground wires going to screws on the power supply
- Disconnect black (degauss?) cable on the bottom of the neck board
- Cut silicone around socket
- Cut sleeved cable ties holding it to the neck board to give room to move it
- These are soldered in place connectors that cannot be unplugged
- Pay attention to red cable (CRT heater?) as it is permanently connected to the tube socket and flyback transformer