Disassembly:Atari SC1224

From Caps Wiki
Revision as of 14:45, 4 February 2022 by Akbkuku (talk | contribs) (Created page with "==Neck Board Removal== The neckboard on the SC1224 has many cables and connectors on it and is glued to the tube with a patch of silicone. thumb Disconnection Checklist: * Detach two ground wires going to screws on the power supply * Disconnect black (degauss?) cable on the bottom of the neck board * Cut silicone around socket * Cut sleeved cable ties holding it to the neck board to give room to move it :* These are soldered in place co...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Neck Board Removal

The neckboard on the SC1224 has many cables and connectors on it and is glued to the tube with a patch of silicone.

Disconnection Checklist:

  • Detach two ground wires going to screws on the power supply
  • Disconnect black (degauss?) cable on the bottom of the neck board
  • Cut silicone around socket
  • Cut sleeved cable ties holding it to the neck board to give room to move it
  • These are soldered in place connectors that cannot be unplugged
  • Pay attention to red cable (CRT heater?) as it is permanently connected to the tube socket and flyback transformer
Retrieved from "https://caps.wiki/index.php?title=Disassembly:Atari_SC1224&oldid=468"