Disassembly:Corsair CX500

From Caps Wiki

Revision as of 20:32, 13 February 2022 by Mattski (talk | contribs) (copied over disassembly info)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The PSU uses normal easy assessable cross head screws, this will not be a problem.

If you want to remove the PCB completely, you will find the wires connected to the Mains power connector a problem. So it is recommended you unsolder these to ease the change of the resistor.

Retrieved from "https://caps.wiki/index.php?title=Disassembly:Corsair_CX500&oldid=1171"