Xbox One X Power Supply
This page is for the Xbox One X Power Supply (1787).
| Preliminary Information | |
|---|---|
| Release Year | November 7, 2017 |
| Mounting Technology | Through Hole, SMD |
| Capacitor Types | Aluminum Electrolytic, Ceramic |
| Destructive Entry | No |
| Power Requirements | |
| Input Voltage | 100-127V ~ 2.75A 50/60Hz . . . . . . . 200-240V ~ 1.3A 50/60Hz |
| Current (Amps) | 20.42A @ 12V |
(Pictures to be added at a later date)
Known Issues
Capacitor Failure
Symptoms
- The console will produce a buzzing noise.
- The console will not power on or powers on for 5 seconds, then powers off.
Causes
- Poor heat dissipation causes the cap to fail.
Solutions
- Replace the 420v 150uF capacitor.
Disassembly Notes
Pry at the sides of the plastic housing. Lifting to free the tabs holding it together.
To remove the circuit board. You will need to remove some of the white Silastic glue in the corner opposite where the cable comes out. As well as near the capacitor itself.
You will need to remove the bottom plate covering the PCB. There are tabs on both the front and back you need to flow to remove the plate. Be aware of the thermal pads between the plate and PCB.
Original Parts
Power Supply
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C150 | 1 | 150 µF | 420 V | Through Hole Radial | 18 mm | 37 mm | 7 mm | 105 °C | Electrolytic | Taicon | 1732(M) |
Replacement Parts
Power Supply
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| C150 | 1 | 420LXW150MEFR18X35 | Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Related Links
References
Here are multiple videos showing the capacitor being replaced.
Qs Tech Service (Xbox Series X Defect Power Supply Rebuild)
TheCod3r (This Xbox One X Makes A Weird Noise When It's Plugged In! Can I Fix It?)