Atari 2600 CX-42 wireless joysticks receiver

From Caps Wiki
Jump to navigation Jump to search
Atari 2600 CX42 wireless joysticks receiver
Preliminary Information
Release Year 1983
Batteries receiver uses no batteries, wireless joystick controllers use standard 9V batteries (1ea.)
Mounting Technology all through-hole, has output cables
Capacitor Types few electrolytics, few ceramics, many poly film
Destructive Entry No


Known Issues

Symptom or Problem Encountered

Causes

  • natural wear or aging, hi/lo temp. cycles, decades of humidity changes, attic/basement/outdoors natural and artificial factors

Solutions

  • replace for chemistry, preventative, or damages

Disassembly Notes

screws, case/shell is 2 halves (a top, a bottom) plus a front plate with cosmetic model info & a back plate with telescoping antenna mount

Original Parts

Basic PCB Name (DSGR-303B)

RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
10 18 nF (183K pF) 100V 0 °C

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Related Links

https://modelrail.otenko.com/retro/repairing-atari-2600-original-wireless-controllers describes replacing receiver's green-caps, includes suggestion of utilizing goot solder wick and jaycar

https://mcurrent.name/atari-8-bit/faq.txt ctrl-F for CX42, details presented as/in text

↑Archive-name: atari-8-bit/faq Last-modified: January 29, 2024

References


same old same old, rebranded, #OEM, etc. Made in Korea by Cynex for Atari 'Game Mate 2'

•receiver requires 9V DC as supplied by the Atari power [pass-thru power] via power adapter or equivalent. The receiver handles/supplies 9V DC for the 2600. each RF/wireless joystick controller requires a similar 9V DC, in battery form.