HP 9121D: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
Line 72: Line 72:
<references />
<references />
[[Category:Floppy Drive]]
[[Category:Floppy Drive]]
[[Category:1980s]]

Latest revision as of 01:31, 13 February 2024

HP 9121D
Preliminary Information
Release Year 1982
Leak Risk Low
Batteries None
Mounting Technology Through Hole, SMD, BGA, Sockets
Capacitor Types Aluminum Electrolytic, Ceramic
Destructive Entry No
Hardware Specifications
Storage 3.5in Single Sided Double Density Floppy Disks
Power Requirements
Power Connector IEC C13/C14 Socket

HP dual floppy drive with Sony OA-D31V-14 model floppy drives.

Known Issues

Disk not spinning

Causes

  • Magnetic hall sensors failsure
    • Test by removing motor assembly, directly powering, and nudge motor to start spinning

Solutions

  • Replace hall THS103A sensors

Cracked D10 Diode

Causes

  • Bent flat when reassembled and crushed by screw post

Solutions

  • Replace diode

Disassembly Notes

Diode D10 next to one of the screw holes on logic board is very easily pinched when reassembling and may be cracked. Be sure to bend it upright before putting PCB back onto chassis

Original Parts

Main Logic Board

FC-6

Diodes
RefDes Qty Forward Voltage Mount
D10 1 3V Axial

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
D10 1 1N5225B-TAP Mouser

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric searc

Related Links

References