Ultra XConnect Modular PSU: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 182: | Line 182: | ||
|- | |- | ||
! colspan="2" |Digikey | ! colspan="2" |Digikey | ||
! colspan="2" | | ! colspan="2" | | ||
! colspan="2" | | ! colspan="2" | | ||
|- | |- | ||
|C305, C306 | |||
|2 | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
|- | |||
|C313 | |||
|1 | |||
|10ZLJ2200MT810X25 | |||
|[https://www.digikey.com/en/products/detail/rubycon/10ZLJ2200MT810X25/3134485 Part] | |||
|[https://www.digikey.com/en/products/filter/aluminum-electrolytic-capacitors/58?s=N4IgjCBcoMxaBjKAzAhgGwM4FMA0IB7KAbXAE4AGCkfMGAFmoF18AHAFyhAGV2AnAJYA7AOYgAvrQBs8EEkhoseQiRAwyAJhgbmbTpB79hYySHozoclBhz4ikUhrABWDTPxP6ZCCxAcuvIKiEvhSZLLyirYqDmZgYAAcZADsIL7%2BBoHGISAarhHWSnaqThr0DDS59BqU9Gl6AUbBpjpeBQo2yvaOOhQABACtAGL1fvogAKpCAuwA8sgAstiomACufNg5OsnhlhmT03OLy2sblatcAGqVALbCXGDU%2BDeoAB4PzjkAtBrt-KtdVSfJjiUFAA 🔎] | |||
| | |||
| | | | ||
| | | | ||
| | | | ||
|- | |- | ||
! colspan="3" |Full Parts BOM | ! colspan="3" |Full Parts BOM | ||
| colspan="2" |[https://www.digikey.com/ BOM] | | colspan="2" |[https://www.digikey.com/ BOM] | ||
| colspan="2" | | | colspan="2" | | ||
| colspan="2" | | | colspan="2" | | ||
|} | |} | ||
''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ''If parts are not available or different selection is preferred, you can use the values in the [[#Original_Parts|Original Parts]] section to perform a parametric search.'' | ||
Revision as of 18:12, 12 February 2022
| Preliminary Information | |
|---|---|
| Release Year | 2004 |
| Leak Risk | Low |
| Mounting Technology | Through Hole |
| Capacitor Types | Aluminum Electrolytic |
| Destructive Entry | No |
The XConnect by Ultra was the world's first fully modular power supply for a computer. Ultra is not a particularly well respected brand though and even when it was new the power supply was known to have issues.
Known Issues
Visually Identified Failures
Cause
- Ruptured vents on C305 and C306[1]
-
Ruptured vents on the capacitors
Solution
- Recapping the entire PSu would likely be a good idea as most of the capacitors are all from the same manufacturer and series
Disassembly Notes
Wires for most of the connectors are directly soldered to the main PCB making it practically impossible to work on without desoldering wires. Specifically the wires for the AC power connector run under some parts and are soldered on both ends making it difficult to remove the PCB. You should get the board out as much as possible and desolder the wires from the PCB to get better access to it.
Original Parts
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter | Temp | Brand | Series |
|---|---|---|---|---|---|---|---|---|
| C305, C306 | 2 | 3300uF | 10V | Through Hole | 10mm | 105C | Fuhjyyu | TNR |
| C304 | 1 | 2.2uF | 50V | Through Hole | 5mm | 105C | Fuhjyyu | TNR |
| C307 | 1 | 70uF | 10V | Through Hole | 8mm | 105C | Fuhjyyu | TNR |
| C308, C309 | 1 | 3300uF | 16V | Through Hole | 13mm | 105C | Fuhjyyu | TNR |
| C310, C311, C3XX? | 3 | 470uF | 15V | Through Hole | 8mm | 105C | Fuhjyyu | TNR |
| C312 | 1 | 1000uF | 10V | Through Hole | 8mm | 105C | Fuhjyyu | TNR |
| C313 | 1 | 2200uF | 10V | Through Hole | 10mm | 105C | Fuhjyyu | TN |
| C214, C107, C108 | 3 | 10uF | 50V | Through Hole | 5mm | 105C | Fuhjyyu | TN |
| C209, C204 | 2 | 1uF | 50V | Through Hole | 5mm | 105C | Fuhjyyu | TN |
| C210 | 1 | 2.2uF | 50V | Through Hole | 5mm | 105C | Fuhjyyu | TN |
| C208?, C201 | 2 | 4.7uF | 50V | Through Hole | 5mm | 105C | Fuhjyyu | TN |
| C202 | 1 | 47uF | 50V | Through Hole | 6mm | 105C | Fuhjyyu | TN |
| C102, C103 | 2 | 1000uF | 200V | Through Hole | 25mm | 85C | CapXon | NEG |
Replacement Parts
TODO
| RefDes | Qty | Compatible Part Number | Distributor Links
[ Preferred / Search ] | |||||
|---|---|---|---|---|---|---|---|---|
| Digikey | ||||||||
| C305, C306 | 2 | |||||||
| C313 | 1 | 10ZLJ2200MT810X25 | Part | 🔎 | ||||
| Full Parts BOM | BOM | |||||||
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.