Disassembly:NEC VERSA 2760MT: Difference between revisions
Jump to navigation
Jump to search
(Add disassembly images) |
(Add text to disassembly) |
||
| Line 2: | Line 2: | ||
|+ | |+ | ||
![[File:Nec versa 2760mt.jpg|thumb]] | ![[File:Nec versa 2760mt.jpg|thumb]] | ||
! | ! | ||
|- | |- | ||
|[[File:Nec versa 2760mt palmrest.jpg|thumb]] | |[[File:Nec versa 2760mt palmrest.jpg|thumb]] | ||
| | |Unscrew the palmrest from the bottom side. | ||
|- | |- | ||
|[[File:Nec versa 2760mt keyboard.jpg|thumb]] | |[[File:Nec versa 2760mt keyboard.jpg|thumb]] | ||
| | |Unscrew the HDD and modem PCB to allow access to keyboard screws. | ||
Slide keyboard towards palm rest and remove. | |||
Careful of keyboard flat-flex cable. | |||
|- | |- | ||
|[[File:Nec versa 2760mt heatspreader.jpg|thumb]] | |[[File:Nec versa 2760mt heatspreader.jpg|thumb]] | ||
| | |Unscrew all heat spreader screws to remove. | ||
|- | |- | ||
|[[File:Nec versa 2760mt topcase open.jpg|thumb]] | |[[File:Nec versa 2760mt topcase open.jpg|thumb]] | ||
| | |Unscrew CPU screws. | ||
Remove CPU gently from high speed interconnectors. | |||
Unscrew all top case screws from bottom, back (IO side) and under heat spreader. | |||
Lift up top case gently, it will not require much force. | |||
Careful of LCD cables. | |||
|- | |- | ||
|[[File:Nec versa 2760mt top case removed.jpg|thumb]] | |[[File:Nec versa 2760mt top case removed.jpg|thumb]] | ||
| | |Disconnect LCD cables. | ||
|- | |- | ||
|[[File:Nec versa 2760mt motherboard removed.jpg|thumb]] | |[[File:Nec versa 2760mt motherboard removed.jpg|thumb]] | ||
| | |Unscrew all screws holding motherboard assembly into bottom case. | ||
Remove CD and floppy cables. | |||
Remove any PCMCIA cards and stow eject latches | |||
Lift motherboard assembly out of bottom case, you will have to lever out the left side IO carefully. | |||
|- | |- | ||
|[[File:Nec versa 2760mt motherboard assembly.jpg|thumb]] | |[[File:Nec versa 2760mt motherboard assembly.jpg|thumb]] | ||
| | |Unscrew remaining screws and rear IO nuts. | ||
Disconnect IO board from motherboard. | |||
|} | |} | ||
Revision as of 03:05, 6 February 2022
 |
|
|---|---|
 |
Unscrew the palmrest from the bottom side. |
 |
Unscrew the HDD and modem PCB to allow access to keyboard screws.
Slide keyboard towards palm rest and remove. Careful of keyboard flat-flex cable. |
 |
Unscrew all heat spreader screws to remove. |
 |
Unscrew CPU screws.
Remove CPU gently from high speed interconnectors.
Lift up top case gently, it will not require much force. Careful of LCD cables. |
 |
Disconnect LCD cables. |
 |
Unscrew all screws holding motherboard assembly into bottom case.
Remove CD and floppy cables. Remove any PCMCIA cards and stow eject latches Lift motherboard assembly out of bottom case, you will have to lever out the left side IO carefully. |
 |
Unscrew remaining screws and rear IO nuts.
Disconnect IO board from motherboard. |