Talk:Olivetti M24 and ATT 6300: Difference between revisions

Latest revision as of 18:41, 16 November 2024

This page should just be titled "Olivetti M24" with a redirect from "ATT 6300"

From the 2022 stream https://youtu.be/mLm6cZ-RznY?t=12534 it was determined this IC's output was incorrect for the input state thus it must be bad:

1pc 20pin DIP 7.62mm socket (assuming you don't already have a bunch of them)
- https://www.digikey.com/en/products/detail/adam-tech/ICS-320-T/9832868

WizardTim (talk) 18:17, 26 May 2024 (UTC)

@@ Line 3: / Line 3: @@
 ----
-From the 2022 stream https://youtu.be/mLm6cZ-RznY?t=12534 you need to buy the following parts:
+From the 2022 stream https://youtu.be/mLm6cZ-RznY?t=12534 it was determined this IC's output was incorrect for the input state thus it must be bad:
-- 1pc https://www.digikey.com.au/en/products/detail/texas-instruments/SN74S374N/377096
+* 1pc <s>https://www.digikey.com.au/en/products/detail/texas-instruments/SN74S374N/377096</s>
+** Faster 74AHC alternative for discontinued 74S https://www.digikey.com/en/products/detail/texas-instruments/SN74AHC374N/375874
-- 1pc https://www.digikey.com.au/en/products/detail/cnc-tech/210-1-20-003/3441486 (I think you said you were a gold turned pin socket fan, not a dual wipe fan)
+* 1pc 20pin DIP 7.62mm socket (assuming you don't already have a bunch of them)
+** https://www.digikey.com/en/products/detail/adam-tech/ICS-320-T/9832868
 [[User:WizardTim|WizardTim]] ([[User talk:WizardTim|talk]]) 18:17, 26 May 2024 (UTC)
 ----