Studer D741
Jump to navigation
Jump to search
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables |
This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so. |
Studer D741
Preliminary Information | |
---|---|
Release Year | 1996 |
Leak Risk | Low |
Batteries | None |
Mounting Technology | Through Hole, SMD, Sockets |
Capacitor Types | Aluminum Electrolytic, Ceramic |
Destructive Entry | No |
The Studer D741 is a broadcast grade, 2U rack-mountable CD recorder and player.
Disassembly Notes
Tools Needed
- 3/16 Hex Driver
- 2.5mm Hex Key
- Phillips Screwdriver PH1
- Flat head Screwdriver
Disassembly
Top Cover
- Disconnect unit from mains
- Remove 3 screws at the top of the unit, 2 screws on each side, and 3 screws at the upper edge of the rear panel
- Lift the rear of the top cover and slide it to the rear until it comes off
Main logic board
- Disconnect all wire harnesses from board. Take care not to damage the thin gauge wires
- Remove 12 hex screws securing XLR connectors at rear
- Remove 4 standoffs securing D-SUB connectors to chassis
- Remove 1 Phillips screw securing SPDIF connectors to chassis
- Remove 5 hex screws securing the logic board
- Carefully lift the logic board from the chassis
Power Supply
- Disconnect all wire harnesses from board.
- Remove 1 hex screw holding ground bond wire
- Remove 2 flat-head and 2 hex screws securing metal plate to heatsink
- Remove 2 hex screws securing IEC connector to chassis
- Remove 3 hex screws securing board to chassis
- Carefully lift the board from the chassis
Original Parts
Main Logic Board
Note model numbers and board revisions here
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
---|---|---|---|---|---|---|---|---|---|---|---|
2254, 2255, 2430, 2431, 2432, 2433, 2522, 2523, 2524, 2525, 2526, 2527 | 12 | 100 µF | 16V | Through Hole | 10mm | 13mm | 85 °C | Aluminum Electrolytic | Nichicon | MUSE BP | |
2243, 2245, 2251, 2253, 2425, 2427, 2428, 2462, 2463, 2464, 2465, 2466, 2467, 2468, 2469, 2480, 2481, 2482, 2483, 2484, 2485, 2486, 2487, 2488, 2489, 2490, 2491 | 27 | 100 µF | 25V | Through Hole | 6mm | 16mm | 85 °C | Aluminum Electrolytic | Nichicon | VX | |
2017, 2018, 2025, 2028, 2031, 2034, 2036, 2038, 2101, 2102, 2104, 2111, 2126, 2150, 2200, 2210, 2214, 2218, 2233, 2236, 2302, 2308, 2312, 2315, 2395, 2396, 2397, 2398, 2472, 2473 | 30 | 47 µF | 25V | Through Hole | 5mm | 12mm | 85 °C | Aluminum Electrolytic | Nichicon | VX | |
2016, 2022, 2216, 2220, 2231, 2235, 2343 | 7 | 10 µF | 50V | Through Hole | 5mm | 12mm | 85 °C | Aluminum Electrolytic | Nichicon | VX |
Power Supply
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
---|---|---|---|---|---|---|---|---|---|---|---|
2529, 2530 | 2 | 1000 µF | 16V | Through Hole | 10mm | 20mm | 85 °C | Aluminum Electrolytic | Panasonic | SU | |
2515, 2524 | 2 | 1000 µF | 25V | Through Hole | 12mm | 25mm | 105 °C | Aluminum Electrolytic | Nichicon | PF | |
2502, 2517, 2526, 2534 | 4 | 47 µF | 35V | Through Hole | 6mm | 10mm | 85 °C | Aluminum Electrolytic | Nichicon | VX | |
2535 | 1 | 3.3 nF | 400V | Through Hole | Ceramic | ||||||
2503, 2504, 2505 | 3 | 2200 µF | 50V | Through Hole | 18mm | 35mm | 85 °C | Aluminum Electrolytic | Nichicon | VX | |
2533 | 1 | 470 µF | 50V | Through Hole | 12mm | 20mm | 85 °C | Aluminum Electrolytic | Panasonic | SU |
Replacement Parts
Main Logic Board
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
2254, 2255, 2430, 2431, 2432, 2433, 2522, 2523, 2524, 2525, 2526, 2527 | 12 | RSRBD101M1EE11300T / RSR0B101M1GF12300T / UEP1H101MPD1AA | Digikey Mouser LCSC |
2243, 2245, 2251, 2253, 2425, 2427, 2428, 2462, 2463, 2464, 2465, 2466, 2467, 2468, 2469, 2480, 2481, 2482, 2483, 2484, 2485, 2486, 2487, 2488, 2489, 2490, 2491 | 27 | 860020473008 / 25YXJ100MFFCT15X11 | DigiKey Mouser LCSC |
2017, 2018, 2025, 2028, 2031, 2034, 2036, 2038, 2101, 2102, 2104, 2111, 2126, 2150, 2200, 2210, 2214, 2218, 2233, 2236, 2302, 2308, 2312, 2315, 2395, 2396, 2397, 2398, 2472, 2473 | 30 | 860020472006 / 25PX47MEFC5X11 | DigiKey Mouser LCSC |
2016, 2022, 2216, 2220, 2231, 2235, 2343 | 7 | 860020672010 / 50YXG10MEFCTA5X11 | DigiKey Mouser LCSC |
Power Supply
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
2529, 2530 | 2 | 860020375017 / 16ZLH1000MEFC8X20 | Digikey Mouser LCSC |
2515, 2524 | 2 | 25YXJ1000M10X20 | DigiKey Mouser LCSC |
2502, 2517, 2526, 2534 | 4 | 860020572006 / 35PX47MEFC5X11 | DigiKey Mouser LCSC |
2535 | 1 | S332M33Z5UN6UJ5R / DCH332Z26Y5VN6BL5A0 | DigiKey Mouser LCSC |
2503, 2504, 2505 | 3 | UHE1H222MHD6 | DigiKey Mouser |
2533 | 1 | ESK477M050AH4KA / 50PX470MEFC10X20 | DigiKey Mouser LCSC |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Kits
- Digikey BOM: https://www.digikey.com/
Additional Images
-
Top cover removed
-
Main logic board
-
Backside of main logic board
-
Power Supply
-
Rear I/O