Netgear GS116 Gigabit Switch
Jump to navigation
Jump to search
- For more information, see this article's corresponding Wikipedia page: Device.
| Preliminary Information | |
|---|---|
| Leak Risk | Low |
| Batteries | None |
| Destructive Entry | No |
Known Issues
Symptom or Problem Encountered
Only working in 100M mode.
Causes
- Capacitor C36 bulging.
Solutions
- Replace C36
Disassembly Notes
Remove two screws at the back and slide the top off towards the back.
Remove the five PCB mounting screws and lift out the PCB.
All screws are M3.
Original Parts
Basic PCB Name
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C36 | 1 | 220 µF | 25V | 10mm | 0 °C |
Replacement Parts
Basic PCB Name
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.