Compaq FS7600
Jump to navigation
Jump to search
- For more information, see this article's corresponding Wikipedia page: Device.
Compaq FS7600
Preliminary Information | |
---|---|
Release Year | 2006 |
Leak Risk | Low |
Batteries | None |
Destructive Entry | No |
Hardware Specifications | |
Display Interface | Vga |
CRT Guides | |
General Information · Repair Cautions |
Known Issues
Symptom or Problem Encountered:
No raster followed by a buzz every 2 seconds. A voltage drop occurs across the board. (this is a somewhat common issue with this monitor)
Causes
Faulty flyback transformer that is arcing internally under load.
Solutions
Replace the flyback transformer.
Disassembly Notes
4 screws on the back and pull off the back cover. Unclip the grounding leads from the neck board shielding. Carefully remove the degauss connector, the main board ground leads, the horizontal and vertical coil connector, and pull out the board.
Original Parts
Basic PCB Name PWB-1726
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
---|---|---|---|---|---|---|---|---|---|---|---|
0 µF | 0 °C |
Replacement Parts
Basic PCB Name: PWB-1726
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Related Links
References