Macintosh Classic

From Caps Wiki
Revision as of 00:24, 19 April 2026 by John (talk | contribs) (links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
For more information, see this article's corresponding Wikipedia page: https://en.wikipedia.org/wiki/Macintosh_Classic.
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
Macintosh Classic
Preliminary Information
Release Year 1990
Leak Risk Medium-High
Batteries Lithium 3,5v
Mounting Technology Through Hole, SMD, BGA, Sockets
Capacitor Types Aluminum Electrolytic
Destructive Entry No
Hardware Specifications
CPU MC68000
Memory Capacity 1-2MB
Storage 3,5in Floppy Drive, 40MB HDD IDE
Display Interface Proprietary

The Macintoshes Classic marked the decline and eventual end of the compact Macs. It was sold from 1990 to 1992 as the low end of the Mac lineup. It ran on an 8 MHz Motorola 68000 processor, which was remarkably slower than its contemporaries, but kept its appeal as the first Mac less than $1000.

Known Issues

Leaky Battery

Cause

  • Age: Old batteries tend to go bad. The ones in the Mac Classic like to also leak and corode the motherboard, sometimes beyond repair.

Solutions

  • First remove the battery (or what's left of it). Then try to neutralise the acid with something like soda. Clean the Board as good as you can. You might be lucky and get away with minor repairs like replacing a few components. There's a big possibility though that traces are damaged. In that case try to rewire them as good as you can with some external thin wires.

Leaky Capacitors

Cause

  • Also age: Capacitors go bad just like batteries. Eventually they will leak all over your board.

Solution

  • Try to clean the board as good as you can from the electrolyte. Then remove the capacitors one by one and clean again (A toothbrush and some isopropyl alkohol are pretty useful. For me, water and soap work better but hard water can leave behind awful stains which may also be conductive). Replace the damaged components that may be around and capacitors. All you have to do now is test it.

Disassembly Notes

Warnings or tips to disassemble the device

Replacement Parts

Analog Board

Observed from 820-0395-C / 630-0420 240v (European version)

Electrolytic Capacitors 820-0395-C / 630-0420 240v
RefDes Qty Capacitance Voltage Diameter/size Height Lead Spacing Board Zone Note
CP1, CP13 1 220 µF 400 V 22 mm 45 mm 10 mm High Voltage no need to replace
CP2 1 1000 µF 35 V 12,5 mm 31,5 mm 5 mm Power Supply
CP4, CF1 2 47 µF 25 V 5 mm 11 mm 2mm (board has 5mm) Power Supply
CP5, CP34, CP37, CL3, CP35 5 1 µF 50 V 5 mm 11 mm 2mm (board has 5mm) Power Supply
CP6, CP36 2 2200 µF 10 V 12,5 mm 25 mm 5 mm Power Supply
CP8 1 2200 µF 16 V 12,5 mm 31,5 mm 5 mm Power Supply
CP12 1 1000 µF 16 V 10 mm 31,5 mm 5 mm Power Supply
CP7 1 1000 µF 10 V 10 mm 20 mm 5 mm Power Supply
CP9, CP10, CF4 3 470 µF 25 V 10 mm 15 mm 5 mm Power Supply
CP11 1 220 µF 25 V 10 mm 25 mm 5 mm THT Flyback
CP3 1 10 µF 25 V 5 mm 11 mm 2mm (board has 5mm) THT Flyback
CL1 1 10 µF 50 V 5 mm 11 mm 2mm (board has 5mm) THT Flyback
CL2 1 4,7 µF 250 V 10 mm 11 mm 5mm THT Flyback
CF2 1 220 µF 16 V 8 mm 11 mm 5mm Video Circuit
CF3 1 1000 µF 16 V 10 mm 20 mm 5mm Video Circuit
CP31 1 1000 µF 6,3 V 10 mm 11 mm 5mm Video Circuit

Logic Board

Note model numbers and board revisions here

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Temp Type Brand Compatible Part Number Order Links
C1, C2, C4, C5, C6, C8, C9 7 47 µF 16 V SMD 6,4 mm 4,65mm 0 °C Polymer Capacitors J2 875105344006 / HV1V476M0605PZ Digikey Mouser LCSC
C3 1 1 µF 50 V SMD 4,2 mm

If parts are not available or different selection is preferred, you can use the values to perform a parametric search.

Kits

References