Glossary: Difference between revisions

From Caps Wiki
Jump to navigation Jump to search
(Created page with "Here you can find an explanation of some terms that may be used on this site === Cap(s) === Short for "Capacitor" === PCB === Stands for "Printed Circuit Board' which is the board that parts are typically mounted to in devices === RefDes === Short for "Reference Designation" which is an identification used to mark the location of each part on a PCB. These are also used for schematics and BOMs to reference which parts should be put at a location on the P...")
 
m (→‎C: link)
(11 intermediate revisions by 5 users not shown)
Line 1: Line 1:
Here you can find an explanation of some terms that may be used on this site
Here you can find an explanation of some terms that may be used on this site


=== Cap(s) ===
== B ==
 
;BGA
Stands for "Ball Grid Array" which is a mounting technology for [[Part Footprints]]
 
;BOM
Stands for "Bill of Materials" which is a list of parts for a device or PCB
 
== C ==
 
;Cap(s)
Short for "[[Capacitors|Capacitor]]"
Short for "[[Capacitors|Capacitor]]"


=== PCB ===
;Condenser
Stands for "Printed Circuit Board' which is the board that parts are typically mounted to in devices
Condenser (or condensator) is the original term used to describe what is now referred to as a "[[Capacitors|Capacitor]]" but became obsolete as it is easily confused with condensers (heat exchangers). This term is used most in older documentation but still remains for certain applications like "condenser microphone" or in documentation that has been translated to English from a language that still uses the original term.
 
;[[CRT]]
Stands for "Cathode Ray Tube", a glass display tube used in older electronics
 
== D ==
 
;DIP
Stands for "Dual Inline Package" which is a mounting technology for [[Part Footprints]]
 
== H ==
 
;Hz or Cycles
Hertz is a measurement of frequency and is stated as the amount of times something happens within one second. Older devices and documents may also use the term "cycles" in the same way.
 
== I ==
 
;IC or Chip
Stands for "Integrated Circuit" which is a semiconductor device that combines the functionality of multiple other parts into one to perform more complicated tasks.
 
== P ==


=== RefDes ===
;PCB
Stands for "Printed Circuit Board' which is the board that parts are typically mounted to in devices, sometimes called a PWB (Printed Wiring Board) in older devices.
 
== R ==
 
;RefDes
[[File:Brother DCP-115C - power unit-4811.jpg|thumb|A circuit board assembly from the PSU of a Brother printer with clearly marked Reference Designations. Some components are not populated.]]
Short for "Reference Designation" which is an identification used to mark the location of each part on a PCB. These are also used for schematics and BOMs to reference which parts should be put at a location on the PCB.
Short for "Reference Designation" which is an identification used to mark the location of each part on a PCB. These are also used for schematics and BOMs to reference which parts should be put at a location on the PCB.


RefDes' are usually denoted with a letter and a number. The letters describe the kind of part that goes there. Some common examples:
RefDes' are usually denoted with a letter and a number. The letters describe the kind of part that goes there. Some common examples:


* C - Capacotor
* C - Capacitor
* R - Resistor
* R - Resistor
* D - Diode
* L - Inductor
* L - Inductor
* Q - A transistor or mosfet
* Q - A transistor or MOSFET
* U - ICs like processors, RAM, or ROMs
* U - ICs like processors, RAM, or ROMs
* T - Transformer
* F - Fuse


=== BOM ===
== S ==
Stands for "Bill of Materials" which is a list of parts for a device or PCB


=== IC or Chip ===
;SIP
Stands for "Integrated Circuit" which is a semiconductor device that combines the functionality of multiple other parts into one to perform more complicated tasks.
Stands for "Single Inline Package" which is a mounting technology for [[Part Footprints]]


=== SMD or SMT ===
;SMD or SMT
Stands for "Surface Mount Device" or "Surface Mount Technology" which is a mounting technology for [[Part Footprints]]
Stands for "Surface Mount Device" or "Surface Mount Technology" which is a mounting technology for [[Part Footprints]]


=== THT ===
== T ==
 
;THT
Stands for  "Through Hole Technology" which is a mounting technology for [[Part Footprints]]
Stands for  "Through Hole Technology" which is a mounting technology for [[Part Footprints]]


=== DIP ===
== Q ==
Stands for "Dual Inline Package" which is a mounting technology for [[Part Footprints]]
 
;QFP
Stands for "Quad Flat Package" which is a mounting technology for [[Part Footprints]]


=== BGA ===
Stands for "Ball Grid Array" which is a mounting technology for [[Part Footprints]]


=== QFP ===
[[Category:Information]]
Stands for "Quad Flat Package" which is a mounting technology for [[Part Footprints]]

Revision as of 17:45, 10 March 2022

Here you can find an explanation of some terms that may be used on this site

B

BGA

Stands for "Ball Grid Array" which is a mounting technology for Part Footprints

BOM

Stands for "Bill of Materials" which is a list of parts for a device or PCB

C

Cap(s)

Short for "Capacitor"

Condenser

Condenser (or condensator) is the original term used to describe what is now referred to as a "Capacitor" but became obsolete as it is easily confused with condensers (heat exchangers). This term is used most in older documentation but still remains for certain applications like "condenser microphone" or in documentation that has been translated to English from a language that still uses the original term.

CRT

Stands for "Cathode Ray Tube", a glass display tube used in older electronics

D

DIP

Stands for "Dual Inline Package" which is a mounting technology for Part Footprints

H

Hz or Cycles

Hertz is a measurement of frequency and is stated as the amount of times something happens within one second. Older devices and documents may also use the term "cycles" in the same way.

I

IC or Chip

Stands for "Integrated Circuit" which is a semiconductor device that combines the functionality of multiple other parts into one to perform more complicated tasks.

P

PCB

Stands for "Printed Circuit Board' which is the board that parts are typically mounted to in devices, sometimes called a PWB (Printed Wiring Board) in older devices.

R

RefDes
A circuit board assembly from the PSU of a Brother printer with clearly marked Reference Designations. Some components are not populated.

Short for "Reference Designation" which is an identification used to mark the location of each part on a PCB. These are also used for schematics and BOMs to reference which parts should be put at a location on the PCB.

RefDes' are usually denoted with a letter and a number. The letters describe the kind of part that goes there. Some common examples:

  • C - Capacitor
  • R - Resistor
  • D - Diode
  • L - Inductor
  • Q - A transistor or MOSFET
  • U - ICs like processors, RAM, or ROMs
  • T - Transformer
  • F - Fuse

S

SIP

Stands for "Single Inline Package" which is a mounting technology for Part Footprints

SMD or SMT

Stands for "Surface Mount Device" or "Surface Mount Technology" which is a mounting technology for Part Footprints

T

THT

Stands for "Through Hole Technology" which is a mounting technology for Part Footprints

Q

QFP

Stands for "Quad Flat Package" which is a mounting technology for Part Footprints