Disassembly:CX500 PSU

From Caps Wiki
Revision as of 19:36, 9 February 2022 by Mattski (talk | contribs) (Created page with "The PSU uses normal easy assessable cross head screws, this will not be a problem. However: if you want to remove the PCB completely, you will find the wires connected to the Mains power connector a problem, so it is recommended you unsolder these to ease the change of the resistor.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The PSU uses normal easy assessable cross head screws, this will not be a problem.

However: if you want to remove the PCB completely, you will find the wires connected to the Mains power connector a problem, so it is recommended you unsolder these to ease the change of the resistor.

Retrieved from "https://caps.wiki/index.php?title=Disassembly:CX500_PSU&oldid=854"