Datapath VisionHD4
- For more information, see this article's corresponding Wikipedia page: Device.
Datapath VisionHD4
| Preliminary Information | |
|---|---|
| Release Year | 2013 |
| Leak Risk | None |
| Batteries | None |
| Mounting Technology | SMD, BGA, Through Hole |
| Capacitor Types | Ceramic only |
| Destructive Entry | No |
| Hardware Specifications | |
| Display Interface | 2x DMS59 high-density connectors |
Disassembly Notes
This card consists of the one PCB and two flat black anodized aluminum plates acting as a heatsink. There is a flat un-anodized aluminum piece between the two black ones to space them apart while conducting heat, thermal paste is applied in between. Several thermal pads are between the PCB and heatsink in addition to some thermal paste for the main fully integrated DC-DC converter (U56).
Recommended Tools
| Driver Type | Size | Notes |
|---|---|---|
| Phillips | #1 | |
| External Hex Nut | 5 mm | Traces routed near nuts, careful not to damage them. |
| Tool | Notes |
|---|---|
| Disposable cloth | To clean off old thermal paste and thermal pad residue |
| Isopropyl alcohol | To clean off old thermal paste and thermal pad residue |
Original Parts
Model: 161
-
Top
-
Bottom
-
First heatsink plate removed
-
Bottom of heatsink with thermal pads
-
PCB top side (heatsink removed)
Fastening Hardware
| Quantity | Size | Length of Thread | Head Type | Driver Type | Coating |
|---|---|---|---|---|---|
| 8 | M3 | 14 mm | Pan | PH1 | Black Anodized |