Proview PX-769N
- For more information, see this article's corresponding Wikipedia page: Device.
| Preliminary Information | |
|---|---|
| Release Year | 2001 |
| Leak Risk | Medium |
| Batteries | None |
| Mounting Technology | Through Hole |
| Capacitor Types | Aluminum Electrolytic, Ceramic |
| Destructive Entry | No |
| Hardware Specifications | |
| Display Interface | Vga |
| CRT Guides | |
| General Information · Repair Cautions | |
The PX-769N is a 17 inch CRT monitor released by Proview in 2001. This page should also aid in repairing the similar 786, 778, 720, and 722 models. These models all share the same general design with slight feature differences such as an osd or speaker cable ports on the sides.
Known Issues
Symptom or Problem Encountered
Causes
Solutions
Disassembly Notes
There are four screws holding the back cover on. Simply place the monitor face down (preferably on something soft as to not damage the display) unscrew the four screws and lift the cover off. To remove the PCB you will need to de-solder the grounding leads between the neck board bracket and the tube. You will also need to carefully bend out the bracket holding the PCB in as it has clips holding it in place. Be sure to remove the ribbon cable holding the front PCB with the buttons.
Original Parts
Basic PCB Name: 200-100-769N
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 µF | 0 °C |
Replacement Parts
Basic PCB Name
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Related Links
References