SP9808 PSU
SP9808 PSU
Preliminary Information | |
---|---|
Release Year | 1998 |
Leak Risk | Low |
Batteries | None |
Mounting Technology | Through Hole |
Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic, Polymer |
Destructive Entry | No |
This is a power supply made by Touch Electronic Co.,LTD that was used in a SFF Pentium 1 PC
Disassembly Notes
IDE cable in my system had to be removed to access PSU and was fragile and tore. Use caution when disconnecting it.
The PSU case may be difficult to get apart and bending it slightly to separate it can lead to more permanent bends in the case.
Original Parts
Main Board
Model Numbers: SP9808, 71-50346-01, E144030(sp)
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Temp | Type | Brand | Series |
---|---|---|---|---|---|---|---|---|---|
C12 | 1 | 3300uF | 10V | Through Hole | 13mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C13, C14, C17 | 3 | 1000uF | 16V | Through Hole | 10mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C16, C26 | 2 | 220uF | 25V | Through Hole | 8mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C25, C18, C20, C19 | 5 | 100uF | 25V | Through Hole | 6.5mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C27 | 1 | 0.47uF | 50V | Through Hole | 5mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C23 | 1 | 47uF | 16V | Through Hole | 5mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C4 | 1 | 47uF | 35V | Through Hole | 6.5mm | 105C | Aluminum Electrolytic | Jamicon | TK |
C2 | 1 | 100uF | 400V | Through Hole | 22mm | 85C | Aluminum Electrolytic | Tosin | CE? |
Replacement Parts
Main Board
RefDes | Qty | Compatible Part Number | Order Links |
---|---|---|---|
C12 | 1 | 10PX3300MEFC10X20 | Digikey |
C13, C14, C17 | 3 | 16PX1000MEFC10X12.5 | Digikey |
C23 | 1 | 25YXF47MEFC5X11 | Digikey |
C4 | 1 | 50YXJ47M6.3X11 | Digikey |
C16, C26 | 2 | 25YXJ220M6.3X11 | Digikey |
C25, C18, C20, C19 | 5 | 35YXJ100M6.3X11 | Digikey |
C2 | 1 | 400BXW100MEFR18X25 | Digikey |
C27 | 1 | 860160672001 | Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.