| This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
|
|
| This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
|
|
| This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
|
|
The RCA J13804 is a CRT television designed for use in American prisons, and is most notable for its transparent plastic case. It is among the last CRTs ever released, as it is equipped with a digital ATSC TV tuner in addition to an analog NTSC TV tuner.
Disassembly Notes
The outer case screws are Torx T20. There is also a Phillips screw on the bottom but its purpose is unclear and does not need to be removed. The motherboard is secured into the case with plastic tabs and sits on plastic rails. Press down on them enough to allow the motherboard to slide out, then slide it out of its rails.
Original Parts
Main Board
TODO: The only identifiable marking on this board is 40-ATC001-MAGXG. Need to determine if this is a board revision, model number, serial number, etc.
Replacement Parts
Main Board
Capacitors
| RefDes
|
Qty
|
Compatible Part Number
|
Order Links
|
|
|
|
|
Digikey
|
TODO: Some capacitors have conflicting polarity markings on the PCB silkscreen between the front and back sides. Need to make note of those and which polarity is correct.
Related Links
TODO
References