Commodore 128

From Caps Wiki
Revision as of 01:19, 13 February 2024 by Andrewsawesome (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
For more information, see this article's corresponding Wikipedia page: Commodore 128.
This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables
This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so.
Commodore 128
Preliminary Information
Release Year 1985
Leak Risk Low
Batteries None
Mounting Technology Through Hole, Sockets
Capacitor Types Aluminum Electrolytic, Tantalum, Ceramic
Destructive Entry No

The Commodore 128, also known as the C128, C-128, or C= 128, is the last 8-bit home computer that was commercially released by Commodore. It uses a built in keyboard, but external power supply, and offers near complete compatibility with its predecessor, the best-selling Commodore 64.

Known Issues

Symptom or Problem Encountered

Causes

  • Description of cause

Solutions

  • Solution to the problem

Disassembly Notes

The case can be opened by removing the visible screws at the bottom, then using a plastic prying tool if necessary. Next, disconnect the keyboard, ground wire, and power led, and the top case will be free.

IMPORTANT: When reinstalling the keyboard and top case, do not overtighten the screws. Doing so will result in visible bumps forming on the top of the computer.

Original Parts

Basic PCB Name

Note model numbers and board revisions here

Capacitor Specifications and Footprint Information
RefDes Qty Capacitance Voltage Mount Diameter/Size Height Lead Spacing Temp Type Brand Series
0 µF 0 °C

Replacement Parts

Basic PCB Name

Capacitors
RefDes Qty Compatible Part Number Order Links
Digikey

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Kits

Related Links

References