D-Link DI-704
| This device is in the WorkNeeded:General category because it was flagged as missing general information about the device. The information may be incomplete, using default text, or inaccurate and should be verified with external sources if possible. If you can add or correct information on this page, please feel free to edit it and do so. | 
|
D-link DI-704
| Preliminary Information | |
|---|---|
| Release Year | Around 2001 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole, SMD, BGA, Sockets |
| Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic, Polymer |
| Destructive Entry | No |
The D-Link DI-704 is an internet gateway and firewall with a 4-port switch. It is controlled via a DB-9 serial port.
Disassembly Notes
- Unscrew the 6 screws on the left, right, and bottom sides
- Break the warranty seal between the back and bottom sides
- Hold the back and front sides with one hand while lifting up from the bottom side where you broke the warranty seal
Original Parts
Main Board
Revision A1
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Pin Ptich | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|
| C13, C34, C51, C53, C59 | 5 | 100 µF | 16 V | Through Hole | ~5.2mm*12mm | ~3mm | 105°C | Aluminum Electrolytic | SC(Generic) | None |
| C65 | 1 | 1000 uf | 16 V | Through Hole | ~10mm*15mm | ~6mm | 105°C | Aluminum Electrolytic | SC(Generic) | None |
Replacement Parts
Basic PCB Name
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.