Datapath VisionHD4: Difference between revisions
Jump to navigation
Jump to search
(Create page with initial basic info) |
|||
| Line 16: | Line 16: | ||
This card consists of the one PCB and two flat black anodized aluminum plates acting as a heatsink. There is a flat un-anodized aluminum piece between the two black ones to space them apart while conducting heat, thermal paste is applied in between. Several thermal pads are between the PCB and heatsink in addition to some thermal paste for the main fully integrated DC-DC converter (U56). | This card consists of the one PCB and two flat black anodized aluminum plates acting as a heatsink. There is a flat un-anodized aluminum piece between the two black ones to space them apart while conducting heat, thermal paste is applied in between. Several thermal pads are between the PCB and heatsink in addition to some thermal paste for the main fully integrated DC-DC converter (U56). | ||
=== Recommended Tools === | |||
{| class="wikitable" | |||
|+ | |||
Fastener Drivers | |||
!Driver Type | |||
!Size | |||
!Notes | |||
|- | |||
|Phillips | |||
|#1 | |||
| | |||
|- | |||
|External Hex Nut | |||
|5 mm | |||
|Traces routed near nuts, careful not to damage them. | |||
|} | |||
{| class="wikitable" | |||
|+ | |||
Other Tools | |||
{| class="wikitable | !Tool | ||
|+ | !Notes | ||
|- | |||
! | |Disposable cloth | ||
! | |To clean off old thermal paste and thermal pad residue | ||
|- | |- | ||
| | |Isopropyl alcohol | ||
| | |To clean off old thermal paste and thermal pad residue | ||
|} | |} | ||
== | == Original Parts == | ||
=== | |||
{| class="wikitable | === Fastening Hardware === | ||
|+ | {| class="wikitable" | ||
! | |+Fasteners (Screws) | ||
! | !Quantity | ||
! | !Size | ||
! | !Length of Thread | ||
!Head Type | |||
!Driver Type | |||
!Coating | |||
|- | |- | ||
| | |8 | ||
| | |M3 | ||
| | |14 mm | ||
| | |Pan | ||
|PH1 | |||
|Black Anodized | |||
|} | |} | ||
[[Category:EditorsToolbox]] | |||
== Related Links == | == Related Links == | ||
Revision as of 11:40, 27 July 2024
- For more information, see this article's corresponding Wikipedia page: Device.
Datapath VisionHD4
| Preliminary Information | |
|---|---|
| Release Year | 2013 |
| Leak Risk | None |
| Batteries | None |
| Mounting Technology | SMD, BGA, Through Hole |
| Capacitor Types | Ceramic only |
| Destructive Entry | No |
| Hardware Specifications | |
| Display Interface | 2x DMS59 high-density connectors |
Disassembly Notes
This card consists of the one PCB and two flat black anodized aluminum plates acting as a heatsink. There is a flat un-anodized aluminum piece between the two black ones to space them apart while conducting heat, thermal paste is applied in between. Several thermal pads are between the PCB and heatsink in addition to some thermal paste for the main fully integrated DC-DC converter (U56).
Recommended Tools
| Driver Type | Size | Notes |
|---|---|---|
| Phillips | #1 | |
| External Hex Nut | 5 mm | Traces routed near nuts, careful not to damage them. |
| Tool | Notes |
|---|---|
| Disposable cloth | To clean off old thermal paste and thermal pad residue |
| Isopropyl alcohol | To clean off old thermal paste and thermal pad residue |
Original Parts
Fastening Hardware
| Quantity | Size | Length of Thread | Head Type | Driver Type | Coating |
|---|---|---|---|---|---|
| 8 | M3 | 14 mm | Pan | PH1 | Black Anodized |