Xbox One X Power Supply

This page is for the Xbox One X (1787) Power Supply made by LITEON.

Xbox One X Power Supply

Preliminary Information
Release Year	November 7, 2017
Mounting Technology	Through Hole, SMD
Capacitor Types	Aluminum Electrolytic, Ceramic
Destructive Entry	No
Power Requirements
Input Voltage	100-127V ~ 2.75A 50/60Hz . . . . . . . 200-240V ~ 1.3A 50/60Hz
Current (Amps)	20.42A @ 12V

This power supply is prone to failure due to little to no ventilation. So the capacitor cooks and vastly reduces its life span. However its worth replacing the single 420v 150µF cap providing the console powers on for a second. Or is making the buzzing noise. No power indicates a do-able, but more involved repair where supposedly you need to source a 4 pin diode package that is somewhat hard to get. Among other parts to replace. Noted in Solutions.

There is another version of the power supply. However the main control chip is directly under the 420v capacitor. Others have deemed them not worth repairing. I do not have access to one.

Known Issues

Capacitor Failure

Symptoms

• The console will produce a buzzing noise.
• The console will not power on or powers on for 5 seconds, then powers off.

Causes

• Poor heat dissipation causes the cap to fail.

Solutions

• Replace the 420v 150uF capacitor.
• If the PSU is completely dead. The repair might be more extensive. See "QS Tech" video in References.

Disassembly Notes

Pry at the sides of the plastic housing. Lifting to free the tabs holding it together. The tabs positions are indicated by the holes on the side of the plastic housing. See Figure A.

To remove the circuit board. You will need to remove some of the white Silastic glue in the corner opposite where the cable comes out. As well as near the capacitor itself. See Figure C.

You will need to remove the bottom plate covering the PCB. There are tabs on both the front and back you need to flow to remove the plate. Be aware of the thermal pads between the plate and PCB.

You could cut the leads to the capacitor and avoid removing the bottom plate if you wanted to save time. Not ideal though.

• 

  Figure A

• 

  Figure B

• 

  Figure C

Original Parts

Power Supply

Capacitor Specifications and Footprint Information

RefDes	Qty	Capacitance	Voltage	Mount	Diameter/Size	Height	Lead Spacing	Temp	Type	Brand	Series
C150	1	150 µF	420 V	Through Hole Radial	18 mm	37 mm	7 mm	105 °C	Electrolytic	Taicon	1732(M)

Replacement Parts

Power Supply

Capacitors

RefDes	Qty	Compatible Part Number	Order Links
C150	1	420LXW150MEFR18X35	Digikey

You can purchase a used power supply from iFixit here if you wanted to outright replace the power supply.

If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.

Related Links

Xbox One X Wikipedia

iFixit repair guides

References

Here are multiple videos showing the capacitor being replaced.

Qs Tech Service (Xbox Series X Defect Power Supply Rebuild)

TheCod3r (This Xbox One X Makes A Weird Noise When It's Plugged In! Can I Fix It?)

Here is a video showing the buzzing noise the power supply makes. Also the console in the state of turning on and then off.

KeleStraza Repairs Electronics (Can I Fix My Broken Xbox One X Power issues?)

Disassembly Video

MrMario2011 (Xbox One X - Teardown, Repaste, & Reassembly Guide)