Samsung SyncMaster 940MW: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 48: | Line 48: | ||
!Brand | !Brand | ||
!Series | !Series | ||
!Comment | |||
|- | |- | ||
| | | | ||
| Line 59: | Line 60: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 72: | Line 74: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 85: | Line 88: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 98: | Line 102: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 111: | Line 116: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 124: | Line 130: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 137: | Line 144: | ||
|105 °C | |105 °C | ||
|Electrolytic | |Electrolytic | ||
| | |||
| | | | ||
| | | | ||
| Line 152: | Line 160: | ||
| | | | ||
| | | | ||
| | |||
|- | |||
| | |||
|1 | |||
|150 µF | |||
|450v | |||
|Thru Hole | |||
|18.00mm | |||
|370.mm | |||
|7.50mm | |||
|105 °C | |||
|Electrolytic | |||
| | |||
| | |||
|Usually don't need to replace | |||
|} | |} | ||
Revision as of 22:47, 28 January 2024
- For more information, see this article's corresponding Wikipedia page: Device.
Samsung SyncMaster 940MW
| Preliminary Information | |
|---|---|
| Release Year | 2006 |
| Leak Risk | High |
| Batteries | None |
| Mounting Technology | Through Hole |
| Capacitor Types | Aluminum Electrolytic |
| Destructive Entry | No |
19" 1440x900 60Hz LCD Panel Computer Monitor with VGA, DVI, Composite, Componet, S-Video, SCART inputs. Internal power supply.
Known Issues
Symptom or Problem Encountered
Causes
- Leaking caps, usually 2ea 820µF 25v Caps
Solutions
- Replace all caps
Disassembly Notes
1. 4 Screws for the base support
2. 3 Case Screws, 2ea in lower corners and 1ea behind base support area
3. Using a plastic spudger, separate case from bottom to top
4. Remove all screws from metal sheld
5. Power Supply is on the left as looking from the rear
Original Parts
Basic PCB Name
Power Supply Board Model Number IP-48135T
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series | Comment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1000 µF | 10v | Thru Hole | 10mm | 14.00mm | 5.00mm | 105 °C | Electrolytic | ||||
| 2 | 820 µF | 25v | Thru Hole | 10mm | 22.00mm | 5.00mm | 105 °C | Electrolytic | ||||
| 1 | 330 µF | 10v | Thru Hole | 8mm | 13.00mm | 3.50mm | 105 °C | Electrolytic | ||||
| 2 | 330 µF | 25v | Thru Hole | 10mm | 14.00mm | 5.00mm | 105 °C | Electrolytic | ||||
| 1 | 47 µF | 50v | Thru Hole | 6.3mm | 12.50mm | 5.00mm | 105 °C | Electrolytic | ||||
| 2 | 33 µF | 25v | Thru Hole | 6.3mm | 7.00mm | 2.50mm | 105 °C | Electrolytic | ||||
| 1 | 22 µF | 50v | Thru Hole | 5.00mm | 12.00mm | 5.00mm | 105 °C | Electrolytic | ||||
| 1 | 3.3 µF | 50v | Thru Hole | 4.00mm | 7.00mm | 2.50mm | 105 °C | Electrolytic | ||||
| 1 | 150 µF | 450v | Thru Hole | 18.00mm | 370.mm | 7.50mm | 105 °C | Electrolytic | Usually don't need to replace |
Replacement Parts
Basic PCB Name
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Related Links
User Manual
YouTube Repair Video by glasstronic