Sharp LC-48CFG6002E: Difference between revisions
Jump to navigation
Jump to search
Tillewolle (talk | contribs) (Added Logic Board) |
Tillewolle (talk | contribs) |
||
| Line 37: | Line 37: | ||
There are A LOT of screws to remove before you can lift the backpanel. | There are A LOT of screws to remove before you can lift the backpanel. | ||
To get to the backside of the power supply board, you need to get out two plastic clips on the board. This works with a small screwdriver or a spudger. | The power supply board is held by four screws with washers. There are the four connectors CON1, CON2, CON4 and CON12 that need to be unplugged. | ||
To get to the backside of the power supply board, you need to get out two plastic clips on the board that hold a plastic protection sheet. This works with a small screwdriver or a spudger. | |||
The logic board is fixed by adhesive tape. If it's needed to get it off there are four screws with washers. It's also held by two metals bars, that are held by three screws. You will also need to unplug the six connectors IR&KEY, SPEAKER, AMP POWER, MAIN POWER, INVERTER, LVDS and two wifi-antenna-connectors. | |||
== Original Parts == | == Original Parts == | ||
Revision as of 11:25, 25 November 2023
- For more information, see this article's corresponding Wikipedia page: Device.
Sharp LC-48CFG6002E
| Preliminary Information | |
|---|---|
| Release Year | 2017 |
| Leak Risk | Medium |
| Batteries | No |
| Mounting Technology | Through Hole, Surface Mount |
| Capacitor Types | Aluminum Electrolytic, Tantalum |
| Destructive Entry | No |
48" LED TV assembled by Sharp. Power supply by Megmeet.
Model number explanation:[1]
- LC – code assigned by the manufacturer to indicate that the product belongs to the class televisions.
- 48 – screen size in inches
- С – type matrix screen on TV: LED
- F – Full HD
- G – Year model development: 2nd half of 2016
- 6 – series
- 00 – model in the series
- 2 – type tuners in TV
- E – country for sale: Europe
Known Issues
Symptom or Problem Encountered
Causes
- Powers off shortly after turning on
Solutions
- Replace Caps
Disassembly Notes
There are A LOT of screws to remove before you can lift the backpanel.
The power supply board is held by four screws with washers. There are the four connectors CON1, CON2, CON4 and CON12 that need to be unplugged.
To get to the backside of the power supply board, you need to get out two plastic clips on the board that hold a plastic protection sheet. This works with a small screwdriver or a spudger.
The logic board is fixed by adhesive tape. If it's needed to get it off there are four screws with washers. It's also held by two metals bars, that are held by three screws. You will also need to unplug the six connectors IR&KEY, SPEAKER, AMP POWER, MAIN POWER, INVERTER, LVDS and two wifi-antenna-connectors.
Original Parts
Megmeet MIP550D-DX2
Power Supply Board
REV 1.0
2012.12.27
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EC1, EC3 | 2 | 10 µF | 50 | Through Hole | 5.25 mm | 11.5 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC2 | 1 | 47 µF | 50 | Through Hole | 6.3 mm | 12 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC4, EC14 | 2 | 47 µF | 200 | Through Hole | 10 mm | 20 mm | 5 mm | -25 °C–105 °C (T) | Aluminium Electrolytic | Chang | GF |
| EC5 | 1 | 82 µF | 450 | Through Hole | 18.2 mm | 37 mm | 7 mm | 105 °C | Aluminium Electrolytic | Chang | PW(M) |
| EC31 | 1 | 2,2 µF | 50 | Through Hole | 5.25 mm | 11 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC16 | 1 | 220 µF | 10 | Through Hole | 6.5 mm | 12 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC6 | 1 | 100 µF | 35 | Through Hole | 6.5 mm | 12 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC7 | 1 | 10 µF | 50 | Through Hole | 5 mm | 10 mm | 5 mm | 105 °C | Aluminium Electrolytic | CapXon | LL |
| EC13 | 1 | 22 µF | 50 | Through Hole | 5 mm | 11 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | RL |
| EC8, EC9, EC11 | 3 | 1000 µF | 10 | Through Hole | 10 mm | 17.5 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | GF |
| EC10 | 1 | 220 µF | 10 | Through Hole | 6.5 mm | 12 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | GF |
| EC12, EC15, EC17 | 3 | 470 µF | 25 | Through Hole | 10 mm | 17,5 mm | 5 mm | -40 °C–105 °C | Aluminium Electrolytic | Chang | GF |
LSC48OHNO8
Logic Board
T.MS6486.711
7472B08DB708
B17072998-0A00947
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Temp | Type | Series | Code |
|---|---|---|---|---|---|---|---|---|---|---|
| E1 | 1 | 470 µF | 35 | Through Hole | 10 mm | 12 mm | –105 °C | Aluminium Electrolytic | RK | |
| ED2 | 1 | 100 µF | 16 | Surface Mount | 6.5 mm | 5 mm | H75 | |||
| 1 | 220 µF | 16 | Surface Mount | 6.5 mm | 6 mm | H74 |
Replacement Parts
Megmeet MIP550D-DX2
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| EC1, EC3 | 2 | EEU-EB1H100SB | Mouser |
| EC2 | 1 | EEU-FR1H470B | Mouser |
| EC4, EC14 | 2 | ||
| EC5 | 1 | ||
| EC31 | 1 | RES05112R2M050B | Mouser |
| EC16 | 1 | EEU-EB1A221SB | Mouser |
| EC6 | 1 | 860240575006 | Mouser |
| EC7 | 1 | ||
| EC13 | 1 | EEU-EB1H220SB | Mouser |
| EC8, EC9, EC11 | 3 | EEU-FR1A102LB | Mouser |
| EC10 | 1 | EEU-FR1A221B | Mouser |
| EC12, EC15, EC17 | 3 | EEU-FR1E471B | Mouser |