Plantronics Colorplus: Difference between revisions

Revision as of 03:24, 24 January 2023

For more information, see this article's corresponding Wikipedia page: Plantronics Colorplus.

Start by unscrewing the 4 standoffs from the two D-Sub connectors at the rear of the card. Then remove the ISA bracket.
Using your fingers, separate the two boards by pulling them apart near each of the three plastic standoffs to release them.
Pull the two boards apart, careful not to bend the connector pins.

Capacitor Specifications and Footprint Information
RefDes	Qty	Capacitance	Mount	Lead Spacing	Type	Markings
C1-C22, C25, C26	24		Through Hole	7mm	?	K104M
C23	1		Through Hole	2mm	Tantalum	336 + 10K
C24, C27-C33	9	33nF	Through Hole	2mm	Ceramic	222
C35	1	33pF	Through Hole	6mm	Ceramic	330K 1KV
C36	1	10pF	Through Hole	6mm	Ceramic	100K 1KV

Capacitor Specifications and Footprint Information
RefDes	Qty	Capacitance	Voltage	Mount	Lead Spacing	Type	Markings
C1-C13, C15, C16, C17	16			Through Hole	7mm	?	K104M
C14		33 µF	10V	Through Hole	5mm	Tantalum	33-10
C18		0.01 µF		Through Hole	2mm	Ceramic	103
*U19 between pins 3 and 7	1			Through Hole	N/A	Ceramic	330K Z5F 1KV Mexico

* Not sure if this is from the factory or not

@@ Line 2: / Line 2: @@
 {{InfoboxDevice
 |Title = Plantronics Colorplus
-|Picture =
+|Picture = File:Plantronics Colorplus.jpg
 |Release Year = 1982
 |Mounting Technology = Through Hole, Sockets