Dell WG261 Logic Board: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 84: | Line 84: | ||
[[Category:2000s]] | [[Category:2000s]] | ||
[[Category:Motherboard]] | [[Category:Motherboard]] | ||
[[Category:WorkNeeded:OriginalParts]] | |||
[[Category:WorkNeeded:ReplacementParts]] |
Revision as of 17:19, 25 January 2022
Dell WG261 Logic Board
Preliminary Information | |
---|---|
Release Year | 2005 |
Leak Risk | Low |
Batteries | CR2032 |
Mounting Technology | Through Hole, Surface Mount |
Capacitor Types | Aluminum Electrolytic |
Destructive Entry | No |
A fairly common series of desktops, the Dell Dimension E510, 5100, and 5150 all shared the same LGA775/Socket T Intel 945G Express-based main logic board which feature PCI-e and 64-bit CPU compatibility with full XP support.
Known Issues
- Machine may exhibit boot errors, graphical artifacts, extremely slow boot, and ultimately random shutdowns.
- A number of capacitors on the motherboard will bulge, possibly vent, and ultimately dry out.
- Solution: Replace all known problem capacitors.
- A number of capacitors on the motherboard will bulge, possibly vent, and ultimately dry out.
Disassembly Notes
These Dell systems are fairly straightforward to disassemble. Simply take note of where all cables are routed. It is advised to remove memory modules, CPU, and CMOS battery (and replace if original) before beginning the repair.
Original Parts
RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Temp | Type | Brand | Series |
---|---|---|---|---|---|---|---|---|---|
todo | todo | 820uF | 6.3V | Through Hole | 8mm | 105C | Electrolytic | United Chemi-Con (NCC) | KZG |
Replacement Parts
Individual Components
RefDes | Qty | Compatible Part Number | Distributor Links
[ Preferred / Search ] | |||||
---|---|---|---|---|---|---|---|---|
Digikey | Mouser | Farnell | ||||||
todo | todo | ESY827M6R3AG8AA | Part | 🔎 | Part | 🔎 | Part | 🔎 |
Full Parts BOM | BOM | BOM | BOM |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.