Apple IIe Aftermarket PSU (Delta Electronics): Difference between revisions
Joel graff (talk | contribs) (title updates) |
Joel graff (talk | contribs) |
||
| Line 21: | Line 21: | ||
==Original Parts== | ==Original Parts== | ||
===Power Supply PCB=== | ===Power Supply PCB=== | ||
''Underside stamped with "MW 302 AP". "Delta Electronics" name found on back of NEMA plug'' | ''Underside stamped with "MW 302 AP". "Delta Electronics" name found on back of NEMA plug.'' | ||
Capactiances are in microfarads (µF) '''''unless otherwise noted''''' | |||
Dimensions are in millimeters (mm) | |||
Temperatures are in degrees Celsius (°C) | |||
{| class="wikitable sortable" | {| class="wikitable sortable" | ||
|+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information | |+Capacitor [[Capacitor Specifications|Specifications]] and [[Part Footprints|Footprint]] Information | ||
!RefDes | !RefDes | ||
!Qty | !Qty | ||
| Line 37: | Line 43: | ||
|C! | |C! | ||
|1 | |1 | ||
|0.1 | |0.1 | ||
|250VAC | |250VAC | ||
|17. | |17.8 | ||
|12. | |12.5 | ||
|15. | |15.6 | ||
|0 | |0 | ||
|Film | |Film (PP) - X2 | ||
|ISKRA | |ISKRA | ||
|- | |- | ||
| Line 50: | Line 56: | ||
|4700 pF | |4700 pF | ||
|250VAC | |250VAC | ||
| | |13 | ||
| | |11 | ||
|10. | |10.5 | ||
|0 | |0 | ||
|Film | |Film (PP) - Y | ||
|ISKRA | |ISKRA | ||
|- | |- | ||
|C4, C5 | |C4, C5 | ||
|2 | |2 | ||
|100 | |100 | ||
| | |200 | ||
|16. | |16.2 | ||
| | |33 | ||
|7. | |7.8 | ||
|85 | |85 | ||
|Electrolytic | |Electrolytic | ||
|Jamicon | |Jamicon | ||
| Line 70: | Line 76: | ||
|C6 | |C6 | ||
|1 | |1 | ||
|100 | |100 | ||
| | |25 | ||
|6. | |6.6 | ||
|11. | |11.6 | ||
|3. | |3.4 | ||
|85 | |85 | ||
|Electrolytic | |Electrolytic | ||
|N/A | |N/A | ||
| Line 81: | Line 87: | ||
|C7, C8, C12 | |C7, C8, C12 | ||
|3 | |3 | ||
|10 | |10 | ||
| | |63 | ||
|5. | |5.2 | ||
|11. | |11.2 | ||
|2. | |2.9 | ||
|85 | |85 | ||
|Electrolyitic | |Electrolyitic | ||
|N/ | |N/A | ||
|- | |||
|C13, C14, C15, C16, C17 | |||
|5 | |||
|1000 | |||
|16 | |||
|13 | |||
|25.8 | |||
|5.8 | |||
|105 | |||
|Electrolytic | |||
|N/A | |||
|- | |||
|C18, C20, C21 | |||
|3 | |||
|220 | |||
|16 | |||
|8.3 | |||
|12 | |||
|3.5 | |||
|85 | |||
|Electrolytic | |||
|N/A | |||
|- | |||
|C19 | |||
|1 | |||
|470 | |||
|16 | |||
|10 | |||
|15 | |||
|5.4 | |||
|105 | |||
|Electrolytic | |||
|N/A | |||
|} | |} | ||
| Line 108: | Line 147: | ||
===Kits=== | ===Kits=== | ||
*Digikey BOM: https://www.digikey.com/ | *Digikey BOM: https://www.digikey.com/short/22pwn3bz | ||
==Related Links== | ==Related Links== | ||
Revision as of 15:16, 11 April 2022
- For more information, see this article's corresponding Wikipedia page: Device.
.jpg)
This is the page for the Delta Electronics MW 302 AP aftermarket power supply for the Apple IIe
Power supply should normally output voltages specified on outer casing (+/-5VDC and +/-12VDC) in an unloaded condition.
Known Issues
Non functional / clicking when powered on
NOTE: Many Apple IIe power supplies (Astec branded) "click" when powered on if they're disconnected from the motherboard and will not provide proper output voltages when unloaded. Some, however, provide constant output regardless. Limited experience with aftermarket PSU's suggest a constant output is to be expected.
Causes
- Blown / failed electrolytic capacitors
Solutions
- Replace electrolytic capacitors
Disassembly Notes
Seven screws to disassemble case. Will need to remove power switch from end to remove board from enclosure. Desolder wires from NEMA plug connection to separate completely.
Original Parts
Power Supply PCB
Underside stamped with "MW 302 AP". "Delta Electronics" name found on back of NEMA plug.
Capactiances are in microfarads (µF) unless otherwise noted
Dimensions are in millimeters (mm)
Temperatures are in degrees Celsius (°C)
| RefDes | Qty | Capacitance | Voltage | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand |
|---|---|---|---|---|---|---|---|---|---|
| C! | 1 | 0.1 | 250VAC | 17.8 | 12.5 | 15.6 | 0 | Film (PP) - X2 | ISKRA |
| C2, C3 | 2 | 4700 pF | 250VAC | 13 | 11 | 10.5 | 0 | Film (PP) - Y | ISKRA |
| C4, C5 | 2 | 100 | 200 | 16.2 | 33 | 7.8 | 85 | Electrolytic | Jamicon |
| C6 | 1 | 100 | 25 | 6.6 | 11.6 | 3.4 | 85 | Electrolytic | N/A |
| C7, C8, C12 | 3 | 10 | 63 | 5.2 | 11.2 | 2.9 | 85 | Electrolyitic | N/A |
| C13, C14, C15, C16, C17 | 5 | 1000 | 16 | 13 | 25.8 | 5.8 | 105 | Electrolytic | N/A |
| C18, C20, C21 | 3 | 220 | 16 | 8.3 | 12 | 3.5 | 85 | Electrolytic | N/A |
| C19 | 1 | 470 | 16 | 10 | 15 | 5.4 | 105 | Electrolytic | N/A |
Replacement Parts
Power Supply PCB
| RefDes | Qty | Compatible Part Number | Order Links |
|---|---|---|---|
| Digikey |
If parts are not available or different selection is preferred, you can use the values in the Original Parts section to perform a parametric search.
Kits
- Digikey BOM: https://www.digikey.com/short/22pwn3bz