Disassembly:CX500 PSU: Difference between revisions

Revision as of 19:36, 9 February 2022 (view source) Mattski (talk \| contribs) (Created page with "The PSU uses normal easy assessable cross head screws, this will not be a problem. However: if you want to remove the PCB completely, you will find the wires connected to the Mains power connector a problem, so it is recommended you unsolder these to ease the change of the resistor.")		Latest revision as of 20:30, 13 February 2022 (view source) Mattski (talk \| contribs) (delete page) Tags: Blanking Visual edit: Switched
Line 1:		Line 1:
	~~The PSU uses normal easy assessable cross head screws, this will not be a problem.~~

	~~However: if you want to remove the PCB completely, you will find the wires connected to the Mains power connector a problem, so it is recommended you unsolder these to ease the change of the resistor.~~

Latest revision as of 20:30, 13 February 2022