Primax Soundstorm: Difference between revisions
Jump to navigation
Jump to search
m (KikiDoesStuff moved page Primax Soundstorm M16C to Device:Primax Soundstorm: Trying to put this sound card under the "Sound Cards" category.) |
m (KikiDoesStuff moved page Device:Primax Soundstorm to Primax Soundstorm: Did it wrong, apologies) |
Revision as of 11:06, 9 February 2022
- For general information, see more on Wikipedia: Gravis Ultrasound
| This device is in the WorkNeeded:OriginalParts category because it was flagged as missing information on the original parts. It may have replacement parts listed but those cannot be assumed to be identical to the originals. If you have a list of the original parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables | 
|
| This device is in the WorkNeeded:ReplacementParts category because it was flagged as missing information on replacement parts. If it has the original parts listed you may be able to search for replacements using the parametric searches available from parts distributors. If you have or make a list of replacement parts, please feel free to add them by copying the relevant table from EditorsToolbox:Tables | 
|
Primax Soundstorm
| Preliminary Information | |
|---|---|
| Release Year | 1995 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole, SMD, Sockets |
| Capacitor Types | Aluminum Electrolytic, Tantalum, Ceramic |
| Destructive Entry | No |
The Primax Soundstorm (also known as Primax Altrasound, MusicSound and Gravis Ultrasound CD3, depending on model and region) is a Gravis Ultrasound clone sound card. Initially released in 1994, the card is fully GUS-compatible and uses Gravis's GF1 chip. Several versions of the card were released, using two distinct PCB models:
- Primax SOUND-M16B (Primax MusicSound, also sold by Gravis themselves as the Gravis Ultrasound CD3) can be distinguished by the inclusion of 3 IDE CD interfaces (Sony, Panasonic, Mitsumi) as well as the "UltraSound compatible" marking on the PCB. FCC ID (found on top right corner of the board): IAX-AGTULTRASYS
- Primax SOUND-M16C (Primax Soundstorm and Altrasound) can be distinguished by the inclusion of 4 IDE CD interfaces (Sony, Panasonic, Mitsumi and universal IDE) and 4 DIP-20 memory chips on the bottom left corner.
Both models are equipped with 512kB of memory and can be upgraded to a maximum of 1024kB using an additional SOJ-40 memory IC, commonly found in graphics cards of the era.
Known Issues
The card is not detected altogether or suffers from memory problems
Causes
- Loose socketed memory chips
- Loose GAL16V8B chip
- Corrosion/oxidation in the sockets of the memory and GAL chips
Solutions
- Reseat the ICs
- Clean the sockets and IC pins.
Original Parts
Primax Soundstorm/Altrasound (SOUND-M16C REV: 0.1)
PCB markings below ICS Gravis GF1 chip: SOUND-M16C REV: 0.1
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Temp | Type |
|---|---|---|---|---|---|---|---|
| C18, C19, C25, C26, C43, C44, C45, C46, C47, C67, C68, C69, C74, C75, C79, C80, C81, C85, C88, C89, C100 | 21 | 1 µF | 50 V | Through Hole | 105C | Aluminium Electrolytic | |
| C2, C17, C96, C97 | 4 | 10 µF | 25 V | Through Hole | 105C | Aluminium Electrolytic | |
| C58, C61 | 2 | 22 µF | 16 V | Through Hole | 105C | Aluminium Electrolytic | |
| C56, C87 | 2 | 33 µF | 25 V | Through Hole | 85C | Aluminium Electrolytic | |
| C14, C30, C57, C101 | 4 | 47 µF | 10 V | Through Hole | Aluminium Electrolytic | ||
| C51, C52, C54, C55, C94, C95 | 6 | 100 µF | 25 V | Through Hole | 85C | Aluminium Electrolytic | |
| C50, C53 | 2 | 470 µF | 16 V | Through Hole | 85C | Aluminium Electrolytic | |
| C48, C49 | 2 | Through Hole | Ceramic |