Akai AP-D210/C: Difference between revisions
(Add pictures for visual identification of one's unit) |
m (Add Mouser shared cart) |
||
| Line 282: | Line 282: | ||
==Replacement Parts== | ==Replacement Parts== | ||
===Kits=== | ===Kits=== | ||
* | * Mouser shared cart: https://eu.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a909df63f2 | ||
== References == | == References == | ||
Revision as of 08:55, 17 November 2023
| Preliminary Information | |
|---|---|
| Release Year | 1982 |
| Leak Risk | Low |
| Batteries | None |
| Mounting Technology | Through Hole |
| Capacitor Types | Aluminum Electrolytic, Ceramic, MKT, Mylar |
| Destructive Entry | No |
The Akai AP-D210/C is a direct drive record player with auto return function. Going by a 1982 brochure[1], it could be considered a mid-tier model.
Known Issues
End of ground lead breaks easily
Causes
- Poor material choice by the manufacturer.
- Lack of an end terminal.
Solutions
- Add an end terminal (fork type highly recommended).
Disassembly Notes
Lock the tone arm and remove the platter and 45RPM adapter as to avoid damaging the lid.
Some wires are permanently fixed to the P.C. boards. The inner frame is also made of plastic and might be brittle.
The screws around this plate on the bottom cover should not be removed.
Original Parts
AC Input P.C. Board
The capacitor listed below is suitable for all but the universal (U) model, since it uses a different type. Match the voltage rating to that of your local line voltage when shopping for a replacement.
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C1 | 1 | 0.01 µF | 125VAC / 250VAC | Through Hole Radial | 22 mm (wide) | 10 mm | 22 mm | MKT | Panasonic | ECQ-UF |
D.D. Servo P.C. Board
These caps do not leak, they instead dry out.
The P.C. board number these specifications are based on is the P1021B503A, but they might be universally compatible with *501A, *502A, *504A and *505A (confirmation needed).
| RefDes | Qty | Capacitance | Voltage | Mount | Diameter/Size | Height | Lead Spacing | Temp | Type | Brand | Series |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C1 | 1 | 47 nF | - | Through Hole Radial | 5 mm | 5 mm | 5 mm | Ceramic | Panasonic | - | |
| C3 | 1 | 1 nF | - | Through Hole Radial | 5 mm | Ceramic | - | - | |||
| C4 | 1 | 2.2 nF | - | Through Hole Radial | 5 mm | Ceramic | - | - | |||
| C6 | 1 | 100 nF | - | Through Hole Radial | 10 mm (width) | 12 mm | 5 mm | Mylar | - | - | |
| C5 | 1 | 8.2 nF | - | Through Hole Radial | 5 mm | 12 mm | 5 mm | Mylar | - | - | |
| C17, C20 | 2 | 10 nF | - | Through Hole Radial | 5 mm | 12 mm | 5 mm | Mylar | - | - | |
| C2, C15, C16, C18, C19 | 5 | 100 µF | 10 V | Through Hole Radial | 6 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C7, C8, C25 | 3 | 1 µF | 50 V | Through Hole Radial | 5 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C9 | 1 | 0.47 µF | 50 V | Through Hole Radial | 6 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C10 | 1 | 3.3 µF | 50 V | Through Hole Radial | 5 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C11, C12 | 2 | 10 µF | 16 V | Through Hole Radial | 6 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C13, C14 | 2 | 22 µF | 10 V | Through Hole Radial | 5 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C21, C22 | 2 | 100 µF | 16 V | Through Hole Radial | 7 mm | 10 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
| C23 | 1 | 1000 µF | 25 V | Through Hole Radial | 15 mm | 15 mm | 8 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SR |
| C24 | 1 | 470 µF | 25 V | Through Hole Radial | 11 mm | 15 mm | 5 mm | 85 °C | Aluminium Electrolytic | Nippon Chemi-Con | SM |
Replacement Parts
Kits
- Mouser shared cart: https://eu.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a909df63f2